Mounts
PMAX-0102
Straight Tube Camera Mount
The PMAX-0102 is a straight tube camera mount for indoor and outdoor use. It is made of aluminum with a warm gray finish and weighs 313 g.
Accessories
Mounts, power, lenses, housings, covers, illuminators and the other parts that turn a camera into a finished installation.
Mounts186Power & PoE9Lenses17Housings20Dome Covers16Bullet Covers6Illuminators3Audio4Displays2Controllers2Cables2Extenders1
Mounts
PMAX-0102
Straight Tube Camera Mount
The PMAX-0102 is a straight tube camera mount for indoor and outdoor use. It is made of aluminum with a warm gray finish and weighs 313 g.
Mounts
PMAX-0103
Straight Tube Camera Mount with Bracket
The PMAX-0103 is a straight tube camera mount supplied with a bracket, suitable for indoor and outdoor use. It is made of aluminum with a warm gray finish.
Mounts
PMAX-0104
Extension Tube Camera Mount
The PMAX-0104 is an extension tube that lengthens a camera mount for indoor and outdoor installations. It is made of aluminum with a warm gray finish and is 540.3 mm long.
Mounts
PMAX-0110
Indoor Mount Kit for I91, I92 and KCM-8111
The PMAX-0110 is an indoor mount kit designed for the I91, I92 and KCM-8111 cameras. It is made of aluminum with a warm gray finish.
Mounts
PMAX-0111
Straight Tube Mount for D5x, D9x, E5x, E9x and E9xx/M
The PMAX-0111 is a straight tube mount for the D5x, D9x, E5x, E9x and E9xx/M camera families. It is made of aluminum with a warm gray finish and is rated for indoor and outdoor use.
Mounts
PMAX-0112
Extension Tube for D5x, D9x, E5x, E9x and E9xx/M
The PMAX-0112 is a 24-inch extension tube for mounting the D5x, D9x, E5x, E9x and E9xx/M cameras at a distance from the mounting surface. It is made of aluminum with a warm gray finish and suits indoor and outdoor use.
Mounts
PMAX-0113
Pendant Mount for A8x Cameras (except A88)
The PMAX-0113 is a pendant mount for the A8x camera series, with the exception of the A88. It is made of white aluminum and can be used indoors and outdoors.
Mounts
PMAX-0115
Pendant Mount for A95x, Z95x, K95x and Q84
The PMAX-0115 is a pendant mount for the A95x, Z95x, K95x and Q84 camera families. It is made of aluminum with a white finish.
Mounts
PMAX-0116
200 mm Extension Tube for Z95x, K95x and Q84
The PMAX-0116 is a 200 mm extension tube for mounting the Z95x, K95x and Q84 cameras at a distance from the mounting surface. It is made of aluminum with a white finish.
Mounts
PMAX-0117
500 mm Extension Tube for Z95x, K95x and Q84
The PMAX-0117 is a 500 mm extension tube for mounting the Z95x, K95x and Q84 cameras at a greater distance from the mounting surface. It is made of aluminum with a white finish.
Mounts
PMAX-0122
Straight Tube Mount for A71, A74, A77, A88 and A9x
The PMAX-0122 is a straight tube mount for the A71, A74, A77, A88 and A9x camera series. It has a white finish and weighs 233 g.
Mounts
PMAX-0123
Extension Tube for A71, A74, A77, A88 and A9x
The PMAX-0123 is a 24-inch extension tube for the A71, A74, A77, A88 and A9x camera series. It is made of aluminum with a white finish and suits indoor and outdoor use.
Mounts
PMAX-0126
Straight Tube Mount with Bracket and Converter Ring for Q75
The PMAX-0126 is a straight tube mount with a bracket and a converter ring designed for the Q75 camera. It has a warm gray finish and weighs 650 g.
Mounts
PMAX-0127
Aluminum Mount Kit for Z83, Z84, A811 and A818 Cameras
The PMAX-0127 is a mount kit for fixing compatible cameras to a wall or ceiling surface. It is built from white aluminum and serves the Z83, Z84, A811 and A818 models. The compact 152 mm round body keeps the installation neat.
Mounts
PMAX-0128
Aluminum Alloy Pendant Mount for Z, Q and K Series Cameras
The PMAX-0128 is a pendant mount that hangs a camera below a ceiling or overhead structure. It is made of white aluminum alloy and weighs 210 g. It fits a broad group of Z-series, Q550 and K-series models.
Mounts
PMAX-0130
Aluminum Mount Kit for A, B and E Series Cameras
The PMAX-0130 is a general-purpose mount kit for attaching compatible cameras to a mounting surface. It has a warm gray aluminum body and a 152 mm round footprint. One kit covers a wide range of A, B and E series models.
Mounts
PMAX-0131
Aluminum Alloy Pendant Mount for A912 Camera
The PMAX-0131 is a pendant mount for hanging an A912 camera from a ceiling or overhead support. It is made of white aluminum alloy.
Mounts
PMAX-0132
Anti-Corrosion Pendant Mount for A962 Camera
The PMAX-0132 is an outdoor pendant mount made for the A962 camera. Its aluminum alloy body carries a protective surface coating for coastal and other corrosive environments. The platinum gray unit weighs 750 g.
Mounts
PMAX-0133
Aluminum Alloy Pendant Mount for A573 Cameras
The PMAX-0133 is a tall pendant mount that suspends a camera well below the ceiling line. It is made of white aluminum alloy and fits the A573, A573-P1 and A573-P2 models. The unit weighs 1254 g.
Mounts
PMAX-0134
200 mm Aluminum Alloy Extension Tube for Z, Q and K Series
The PMAX-0134 is a 200 mm extension tube used to increase the drop length of a pendant installation. It is manufactured in white aluminum alloy and matches a broad group of Z-series, Q550 and K-series cameras.
Mounts
PMAX-0135
Pendant Mount for A966, A967 and A972 Cameras
The PMAX-0135 is a pendant mount for suspending cameras from the A966, A967 and A972 families. It is intended for ceiling or overhead installations of these models.
Mounts
PMAX-0136
Aluminum Alloy Pendant Mount for A76D to A822D Cameras
The PMAX-0136 is a pendant mount that suspends compatible A-series cameras from a ceiling or overhead support. It is made of white aluminum alloy.
Mounts
PMAX-0137
Stainless Steel Outdoor Pendant Mount for K9001
The PMAX-0137 is an outdoor pendant mount designed for the K9001 camera. Stainless steel construction suits exposed locations and supports the weight of this larger unit. The mount weighs 2700 g.
Mounts
PMAX-0138
Camera Mount
The PMAX-0138 is a camera mount accessory. Detailed dimensions, materials and the list of compatible cameras are not published for this item, so confirm fitment before ordering.
Mounts
PMAX-0302
Aluminum Gooseneck with Bracket for Indoor and Outdoor Use
The PMAX-0302 combines a gooseneck arm with a mounting bracket, letting a camera be positioned away from the wall and angled as needed. It is made of aluminum and is suitable for both indoor and outdoor locations.
Mounts
PMAX-0303
Aluminum Gooseneck for Indoor and Outdoor Use
The PMAX-0303 is a gooseneck arm for offsetting and aiming a camera from its mounting point. It is made of aluminum and can be installed indoors or outdoors.
Mounts
PMAX-0305
Aluminum Heavy Duty Wall Mount for Indoor and Outdoor Use
The PMAX-0305 is a heavy duty wall mount built from aluminum for cameras that need a solid support arm. It can be used indoors and outdoors.
Mounts
PMAX-0305-K1
Heavy Duty Wall Mount with Endurance Coating for I915-K1 and B915-K1
The PMAX-0305-K1 is a heavy duty wall mount with an endurance coating, specified for the I915-K1 and B915-K1 cameras. It shares the footprint of the standard PMAX-0305 and weighs 941.5 g.
Mounts
PMAX-0310
10-Degree Plastic Tilted Wall Mount for Indoor Hemispheric and Fisheye Cameras
The PMAX-0310 is a low-profile wall mount that angles a hemispheric or fisheye camera instead of pointing it straight down. It is made of plastic, weighs 86 g and is listed for indoor and outdoor use.
Mounts
PMAX-0311
Aluminum L-Type Wall Mount for I91, I92 and KCM-8111
The PMAX-0311 is an L-type wall mount for indoor cameras, built from warm gray aluminum. It supports the I91, I92 and KCM-8111 models and weighs 814 g.
Mounts
PMAX-0312
Aluminum PTZ Wall Mount for Outdoor PTZ and Speed Dome Cameras
The PMAX-0312 is a wall mount for outdoor PTZ and speed dome cameras. It is made of aluminum and weighs 827.5 g. It does not fit the KCM-8211 and TCM-6630.
Mounts
PMAX-0313
Aluminum Heavy Duty Wall Mount for Indoor Dome Cameras
The PMAX-0313 is a heavy duty wall mount for indoor dome cameras. It is made of warm gray aluminum and weighs 975.5 g.
Mounts
PMAX-0316
Aluminum Indoor Wall Mount for D, E Series Cameras
The PMAX-0316 is a compact wall mount for indoor D-series and E-series cameras. It is made of warm gray aluminum and weighs 278.5 g.
Mounts
PMAX-0318
Aluminum Wall Mount for Z and A Series Cameras
The PMAX-0318 is a compact wall mount in white aluminum. It covers a range of Z-series and A-series models and weighs 298.5 g.
Mounts
PMAX-0320
10-Degree Plastic Tilted Wall Mount for Indoor Hemispheric Cameras with IR LED
The PMAX-0320 is a wall mount for indoor hemispheric cameras that include an IR LED. Its 10-degree tilt angles the lens away from the wall plane. The body is plastic and weighs 84.5 g.
Mounts
PMAX-0322
Aluminum Wall Mount for Z950, Z952, Z954, Z956, Z957 and Z958
The PMAX-0322 is a wall mount for the Z950 to Z958 group of cameras. It is built from white aluminum and weighs 825.5 g.
Mounts
PMAX-0330
10-Degree Aluminum Tilted Wall Mount for Outdoor Hemispheric Cameras
The PMAX-0330 is a wall mount that angles an outdoor hemispheric camera by 10 degrees. It is made of aluminum, weighs 208.5 g and is listed for indoor and outdoor use.
Mounts
PMAX-0332
Bronze Height Strip Mount for L-Shape Pinhole Covert Cameras
The PMAX-0332 is a vertical height strip that holds L-shape pinhole covert cameras at a set position along a door frame or similar edge. It is made of bronze-finished aluminum and is intended for indoor use.
Mounts
PMAX-0334
Tiltable Surface Mount for L-Shape Pinhole Covert Cameras
The PMAX-0334 is a very small surface mount for L-shape pinhole covert cameras. It allows the camera angle to be adjusted and weighs only 22 g. It is made of black aluminum for indoor use.
Mounts
PMAX-0335
Silver Tilt Wedge for PMAX-0331 Height Strip Mount
The PMAX-0335 is a tilt wedge that adds a 20-degree angle to the PMAX-0331 strip mount. It is made of silver aluminum for indoor use.
Mounts
PMAX-0336
Bronze Tilt Wedge for PMAX-0332 Height Strip Mount
The PMAX-0336 is a tilt wedge that adds a 20-degree angle to the PMAX-0332 height strip mount. It is made of bronze aluminum for indoor use.
Mounts
PMAX-0338
35-Degree Aluminum Tilted Wall Mount for Fisheye and Hemispheric Cameras
The PMAX-0338 is a wall mount that angles a fisheye or hemispheric camera by 35 degrees for a wider wall-side view. It is made of aluminum, weighs 421.5 g and is listed for indoor and outdoor use.
Mounts
PMAX-0343
Gooseneck with Bracket and Converter Ring for Q75
The PMAX-0343 is a gooseneck and bracket set supplied with a converter ring for the Q75 camera. It lets the camera be offset from its mounting surface and aimed as needed. The assembly weighs 736.5 g.
Mounts
PMAX-0344
Gooseneck Mount with Converter Ring for Q75
The PMAX-0344 is a gooseneck camera mount supplied with a converter ring for the Q75. It lets the camera be positioned and re-aimed without a fixed bracket angle.
Mounts
PMAX-0346
Heavy Duty Wall Mount with Converter Ring
The PMAX-0346 is a heavy duty wall mount that includes a converter ring for larger camera housings. It fits the Q75, A950, A951, A952 and A956.
Mounts
PMAX-0349
Wall Mount with Built-in Junction Box
The PMAX-0349 is a wall bracket with an integrated junction box, so cable connections can be housed at the mounting point. It is intended for the Y7x, Z5x, Z7x and Z91x series.
Mounts
PMAX-0351
Aluminum Wall Mount for Z953, K95X and Q84
The PMAX-0351 is a wall mount for the Z953, K95X and Q84 cameras. It is made from aluminum alloy.
Mounts
PMAX-0354
Heavy Duty Wall Mount for Outdoor Domes
The PMAX-0354 is a heavy duty wall mount for outdoor dome cameras. It is made from aluminum and covers the A711, A713, B8x, B9x and E8x models.
Mounts
PMAX-0355
10-Degree Tilted Wall Mount for A711 and A713
The PMAX-0355 is a low-profile wall mount that angles the camera 10° from the mounting surface. It is rated for indoor and outdoor use with the A711 and A713.
Mounts
PMAX-0356
35-Degree Tilted Wall Mount for A711 and A713
The PMAX-0356 is a wall mount that angles the camera 35° from the mounting surface. It is rated for indoor and outdoor use with the A711 and A713.
Mounts
PMAX-0357
Wall Mount for Select Cameras
The PMAX-0357 is a wall mount bracket that lets compatible cameras be fixed to a vertical surface. It suits installers who need a matching mounting option rather than a generic bracket. Compatibility is listed per camera model.
Mounts
PMAX-0358
Parapet Wall Mount for Z95x, K95X and Q84
The PMAX-0358 is a parapet wall mount for rooftop and ledge installations. It supports the Z95x, K95X and Q84 cameras.
Mounts
PMAX-0359
Wall Mount for A912
The PMAX-0359 is a wall mount made for the A912 camera. It combines plastic and steel parts in a white finish.
Mounts
PMAX-0360
Tilted Wall Mount for A912
The PMAX-0360 is a tilted wall mount for the A912 camera. It is made from plastic in a white finish.
Mounts
PMAX-0362
Anti-Corrosion Wall Mount for A962
The PMAX-0362 is an outdoor wall mount for the A962, built from coated aluminum alloy for coastal and corrosive environments. It is tested to a C5-M equivalent salt spray standard.
Mounts
PMAX-0363
Wall Mount for A573, A573-P1 and A573-P2
The PMAX-0363 is a wall mount for the A573, A573-P1 and A573-P2 cameras. It is made from aluminum alloy in white.
Mounts
PMAX-0365
Wall Mount with Built-in Junction Box
The PMAX-0365 is a wall bracket with an integrated junction box for cable connections. It supports the Y7x, Z5x, Z7x, Z91x, K5x and K7x series.
Mounts
PMAX-0366
Wall Mount with Junction Box for Z9x, Z8x and A7X
The PMAX-0366 is a wall mount with a built-in junction box. It covers the Z9x, Z724, Z77, Z8x, Z972, A7X and Q550 cameras.
Mounts
PMAX-0367
Wall Mount with Junction Box for Z83, Z84, Z810, Z818
The PMAX-0367 is a wall bracket with an integrated junction box for the Z83, Z84, Z810 and Z818 cameras. It is built from white aluminum alloy.
Mounts
PMAX-0368
Wall Mount with Built-in Junction Box for Q711
The PMAX-0368 is a wall mount with a built-in junction box, made for the Q711 camera. It is built from aluminum alloy.
Mounts
PMAX-0370
Camera Mount
The PMAX-0370 is a camera mount accessory. Compatible models and physical specifications are not listed for this item, so confirm fit before ordering.
Mounts
PMAX-0372
Wall Mount for A76D, A77D, A78D and A82xD Series
The PMAX-0372 is a white aluminum alloy wall mount for the A76D, A77D, A78D, A820D, A821D and A822D cameras.
Mounts
PMAX-0373
Wall Mount with Junction Box for A76D, A77D, A78D and A82xD Series
The PMAX-0373 is a wall mount with a built-in junction box for cable connections. It fits the A76D, A77D, A78D, A820D, A821D and A822D.
Mounts
PMAX-0374
Stainless Steel Outdoor Wall Mount for K9001
The PMAX-0374 is an outdoor wall mount for the K9001 camera. It is made from stainless steel in a silver finish.
Mounts
PMAX-0375
Camera Mount
The PMAX-0375 is a camera mount accessory. Compatible models and physical specifications are not listed for this item, so confirm fit before ordering.
Mounts
PMAX-0402
Corner Mount
The PMAX-0402 is a corner mounting bracket that lets a camera be fixed to the outside or inside angle of a wall. It is rated for indoor and outdoor use and finished in warm gray. It gives installers a sturdy base where a flat wall is not available.
Mounts
PMAX-0403
Corner Mount for Covert and Pinhole Covert Cameras
The PMAX-0403 is a lightweight indoor corner mount for covert and pinhole covert cameras. It sets the camera at a 45° angle.
Mounts
PMAX-0404
Aluminum Corner Mount for Z950 and Z952
The PMAX-0404 is a corner mount for mounting the Z950 and Z952 on building corners. It is made from aluminum in white.
Mounts
PMAX-0407
Stainless Steel Corner Mount for A42x, A7xD and A82xD
The PMAX-0407 is a stainless steel corner mount for building corners. It fits several box and dome models listed below.
Mounts
PMAX-0408
Corner Mount for A950
The PMAX-0408 is a corner mount made for the A950 camera, supplied in white.
Mounts
PMAX-0409
Corner Mount for A7x, Z7xx, Z8x, Z9x, Q550 and K Series
The PMAX-0409 is a corner mount that supports a broad set of camera series. Material, color and dimensions are not listed for this item.
Mounts
PMAX-0410
Corner Mount with Junction Box for A966, A967 and A972
The PMAX-0410 is a large corner mount with an integrated junction box. It is rated for indoor and outdoor use and fits the A966, A967, A967B, A967B-2MP and A972.
Mounts
PMAX-0411
Stainless Steel Corner Mount for A427, A428 and A429
The PMAX-0411 is a corner mount made from stainless steel for the A427, A428 and A429 cameras.
Mounts
PMAX-0503
Pole Mount for 5.25 to 8.5 in Poles
The PMAX-0503 is an aluminum pole mount for larger-diameter poles. It attaches the listed mounts and housings to poles of 5.25 to 8.5 in.
Mounts
PMAX-0504
Pole Mount for 3.25 to 7.0 in Poles
The PMAX-0504 is an aluminum pole mount for smaller-diameter poles. It supports the listed B, E and I series cameras and PMAX-0330 on poles of 3.25 to 7.0 in.
Mounts
PMAX-0505
Pole Mount for 2" to 3" Poles
The PMAX-0505 attaches compatible cameras to round poles from 2" to 3" in diameter. It is built from aluminum and suits indoor and outdoor installations. The compatible list covers the B, E and I series plus four PMAX-03xx models.
Mounts
PMAX-0506
Pole Mount for 2" to 3" Poles
The PMAX-0506 is a lightweight aluminum bracket that secures A31, A4x, E78, E9x and E9xx cameras to poles of 2" to 3". It is intended for indoor or outdoor use. The compact body keeps the camera close to the pole.
Mounts
PMAX-0508
Heavy-Duty Pole Mount for 3" to 9" Poles
The PMAX-0508 is an outdoor pole mount covering a wide pole range of 3" to 9". It is designed for the PMAX-0203 to PMAX-0206 mounting parts and the PMAX-0704 junction box. The aluminum body is finished in white.
Mounts
PMAX-0510
Pole Mount for Micro Box and Micro Bullet Cameras
The PMAX-0510 is a small pole bracket for micro box and micro bullet cameras. It clamps to narrow poles from 15 to 40 mm and can be used indoors or outdoors. The body is aluminum with a black finish.
Mounts
PMAX-0511
Pole Mount for 5.25" to 8.5" Poles
The PMAX-0511 mounts A8x cameras on large-diameter poles of 5.25" to 8.5". It is made of aluminum with a white finish and is suitable for indoor and outdoor sites.
Mounts
PMAX-0512
Pole Mount for 3.25" to 7.0" Poles
The PMAX-0512 is an aluminum pole mount for the E39 camera and the PMAX-0706 accessory. It accepts poles from 3.25" to 7.0" and is usable indoors and outdoors.
Mounts
PMAX-0513
Pole Mount for 2.6" to 5" Poles
The PMAX-0513 is a pole mount for the Z950 camera. It clamps to poles of 2.6" to 5" and is made of white aluminum.
Mounts
PMAX-0514
Pole Mount for A950
The PMAX-0514 is a pole mount made for the A950 camera. It weighs 1274 g and is finished in white. Pole range and material are not specified.
Mounts
PMAX-0517
Pole Mount for 3.25" to 7.0" Poles
The PMAX-0517 secures A46, A48, A421 and A425 cameras to poles measuring 3.25" to 7.0". The aluminum bracket is rated for indoor and outdoor use.
Mounts
PMAX-0518
Pole Mount for 2" to 3" Poles
The PMAX-0518 is the small-pole variant for A46, A48, A421 and A425 cameras, clamping to poles of 2" to 3". It is finished in white and weighs 248.5 g.
Mounts
PMAX-0524
Stainless Steel Pole Mount for 2.64" to 5" Poles
The PMAX-0524 is a stainless steel pole mount for the A46, A410, A421, A422, A423 and A425 cameras and the VMGB-359. It accepts poles from 2.64" to 5".
Mounts
PMAX-0526
Pole Mount for 2.64" to 5" Poles
The PMAX-0526 is a light pole mount for the Y, Z and K series cameras listed, including the -P1 variants. It fits poles of 2.64" to 5" and combines aluminum and stainless steel parts.
Mounts
PMAX-0531
Pole Mount for 5.25" to 8.5" Poles
The PMAX-0531 is a pole mount for the PMAX-0346, supporting large poles of 5.25" to 8.5". It is finished in warm gray.
Mounts
PMAX-0532
Pole Mount for 2.6" to 5" Poles
The PMAX-0532 is a galvanized sheet pole mount for the Z5x, Z8x, Z9x, A7x and Q550 families, plus the Z724 and Z972. It clamps to poles of 2.6" to 5" and weighs 207.5 g.
Mounts
PMAX-0533
Pole Mount for 2.64" to 5" Poles
The PMAX-0533 is an aluminum alloy pole mount for A310, A311 and A314 cameras. It supports poles from 2.64" to 5" and is finished in white.
Mounts
PMAX-0534
Pole Mount with Junction Box for 3.25" to 7.0" Poles
The PMAX-0534 combines a pole mount and a junction box for the Q450 and A426 cameras. It supports poles of 3.25" to 7.0" and is made of aluminum.
Mounts
PMAX-0537
Pole Mount with Junction Box for 2.64" to 5" Poles
The PMAX-0537 is a pole mount with an integrated junction box for the A966, A967, A967B, A967B-2MP and A972. It accepts poles of 2.64" to 5" and uses aluminum and stainless steel construction.
Mounts
PMAX-0538
Pole Mount for 2.64" to 5" Poles
The PMAX-0538 is a broad-compatibility pole mount covering the Z, K, A7x and Q550 families listed. It clamps to poles of 2.64" to 5" and is made of aluminum alloy.
Mounts
PMAX-0540
Camera Mount
The PMAX-0540 is a camera mounting accessory. No compatibility, material or dimension data is available for this item, so please confirm details with TactiSight before ordering.
Mounts
PMAX-0541
Anti-Corrosion Pole Mount for A962
The PMAX-0541 is an outdoor pole mount for the A962, built for corrosive coastal conditions. It uses SUS316L stainless steel with a protective coating, giving a stated seashore chassis resistance of about 3 years.
Mounts
PMAX-0542
Horizontal Pole Mount for 2.64" to 5" Poles
The PMAX-0542 is a horizontal pole mount for the A966, A967, A967B, A967B-2MP and A972 cameras. It supports poles of 2.64" to 5" and is made of stainless steel.
Mounts
PMAX-0543
Stainless Steel Pole Mount for 3" to 5.1" Poles
The PMAX-0543 is an outdoor stainless steel pole mount for the K9001. It clamps to poles of 3" to 5.1" and weighs 3080 g.
Mounts
PMAX-0545
Camera Mount
The PMAX-0545 is a camera mounting accessory. No compatibility, material or dimension data is available for this item, so please confirm details with TactiSight before ordering.
Mounts
PMAX-0546
Camera Mount
The PMAX-0546 is a camera mounting accessory. No compatibility, material or dimension data is available for this item, so please confirm details with TactiSight before ordering.
Mounts
PMAX-0702
Outdoor Junction Box for PTZ and Dome Cameras
The PMAX-0702 is an IP66 aluminum junction box for PTZ and dome cameras installed outdoors. It gives cable connections a protected enclosure close to the camera.
Mounts
PMAX-0704
IP66 Junction Box for A4x, B4x, E4x and I4x Cameras
The PMAX-0704 is an outdoor aluminum junction box with IP66 protection. It supports a wide group of A, B, E and I series cameras and the PMAX-0203 to PMAX-0205 mounts.
Mounts
PMAX-0711
Junction Box for Z950
The PMAX-0711 is an aluminum junction box for the Z950 camera. It weighs 3198.5 g and is finished in white.
Mounts
PMAX-0712
Junction Box for Z9x, Z714, Z77 and K7x
The PMAX-0712 is a compact round junction box for the Z9x, Z714, Z77 and K7x cameras. It is made of aluminum and weighs 183.5 g.
Mounts
PMAX-0714
Junction Box for Z31
The PMAX-0714 is a small square aluminum junction box for the Z31 camera, measuring 93 x 93 x 39 mm. It is finished in white.
Mounts
PMAX-0718
Junction Box for A71, A74 and A77
The PMAX-0718 is a compact round junction box for the A71, A74 and A77 cameras. It is made of aluminum alloy and weighs 172.5 g.
Mounts
PMAX-0721
Junction Box for A422 and A423
The PMAX-0721 is a junction box matched to A422 and A423 cameras. It provides a base for routing and terminating cabling at the mounting point. The body is made of aluminum alloy.
Mounts
PMAX-0723
Junction Box for Z83 and Z84
The PMAX-0723 is a junction box matched to Z83 and Z84 cameras. It provides a base for routing and terminating cabling at the mounting point. The body is made of aluminum alloy.
Mounts
PMAX-0724
Junction Box for Y31, Y32, Z316, Z317, K31, K32 and K33 Series
The PMAX-0724 is a junction box matched to Y31, Y32, Z316, Z316-P1, Z317, Z317-P1, K31, K31-P1, K32, K32-P1 and K33 cameras. It provides a base for routing and terminating cabling at the mounting point. The body is made of aluminum alloy.
Mounts
PMAX-0725
Junction Box for Z41 and Z42
The PMAX-0725 is a junction box matched to Z41 and Z42 cameras. It provides a base for routing and terminating cabling at the mounting point. The body is made of aluminum alloy.
Mounts
PMAX-0726
Junction Box for A310, A311 and A314
The PMAX-0726 is a junction box matched to A310, A311 and A314 cameras. It provides a base for routing and terminating cabling at the mounting point. The body is made of aluminum alloy.
Mounts
PMAX-0727
Junction Box for Y7x, Z5x, Z7x and K5x
The PMAX-0727 is a junction box matched to the Y7x, Z5x, Z7x and K5x families cameras. It provides a base for routing and terminating cabling at the mounting point. The body is made of aluminum alloy.
Mounts
PMAX-0728
Junction Box for Q450 and A426
The PMAX-0728 is a junction box matched to Q450 and A426 cameras. It provides a base for routing and terminating cabling at the mounting point.
Mounts
PMAX-0729
Junction Box for Z39, Z310, Z318, Z319, Z322, Z49, Z412, Z413 and Z419
The PMAX-0729 is a junction box matched to Z39, Z310, Z318, Z319, Z322, Z49, Z412, Z413, Z413-P1 and Z419 cameras. It provides a base for routing and terminating cabling at the mounting point. The body is made of aluminum alloy.
Mounts
PMAX-0731
Junction Box for Z411
The PMAX-0731 is a junction box matched to Z411 cameras. It provides a base for routing and terminating cabling at the mounting point. The body is made of aluminum alloy.
Mounts
PMAX-0733
Junction Box for Z959
The PMAX-0733 is a junction box matched to Z959 cameras. It provides a base for routing and terminating cabling at the mounting point. The body is made of aluminum alloy.
Mounts
PMAX-0735
Junction Box for A573 Series Cameras
The PMAX-0735 is a round junction box designed to sit behind compatible A573-series cameras and tidy the cable connection point. It gives a neat, enclosed termination on the mounting surface.
Mounts
PMAX-0736
Junction Box for Z724, Z81 to Z87, Z812 to Z814, Z914, Z972 and Q550
The PMAX-0736 is a junction box matched to Z724, Z81, Z82, Z85, Z86, Z87, Z812, Z813, Z814, Z914, Z972 and Q550 cameras. It provides a base for routing and terminating cabling at the mounting point. The body is made of aluminum alloy.
Mounts
PMAX-0737
Junction Box for Z411 and Z429
The PMAX-0737 is a junction box matched to Z411 and Z429 cameras. It provides a base for routing and terminating cabling at the mounting point. Material and finish are not specified.
Mounts
PMAX-0738
Anti-Corrosion Junction Box for A962
The PMAX-0738 is an outdoor junction box designed for A962 cameras. Its aluminum alloy body carries a protective coating that resists corrosion near the sea. It supports loads up to 10 kg.
Mounts
PMAX-0739
Camera Mount
The PMAX-0739 is a camera mount accessory from the mounting range. No dimensions, material or compatibility data are available for this item, so confirm fit before ordering.
Mounts
PMAX-0740
Junction Box for A76D, A77D, A78D, A820D, A821D and A822D
The PMAX-0740 is a junction box matched to A76D, A77D, A78D, A820D, A821D and A822D cameras. It provides a base for routing and terminating cabling at the mounting point. The body is made of aluminum alloy.
Mounts
PMAX-0803
Gang Box Converter for Indoor Domes
The PMAX-0803 is a gang box converter for indoor dome cameras. It adapts the camera base to 4-inch square and two-gang boxes, so the camera can be fixed to existing electrical boxes. It is intended for indoor use.
Mounts
PMAX-0804
Gang Box Converter for Outdoor Domes
The PMAX-0804 is a gang box converter for outdoor dome cameras. It adapts the camera base to two-gang boxes, so the camera can be fixed to existing electrical boxes. It is intended for indoor/outdoor use.
Mounts
PMAX-0805
Gang Box Converter for D5x, D9x, E5x, E78, E9x
The PMAX-0805 is a gang box converter for D5x, D9x, E5x, E78, E9x and E9xx/M cameras. It adapts the camera base to 4-inch round and 4-inch octagon boxes, so the camera can be fixed to existing electrical boxes. It is intended for indoor use.
Mounts
PMAX-0806
Gang Box Converter for B4x and E44 to E46
The PMAX-0806 is a gang box converter for B4x, E44, E45, E46, E44A, E45A and E46A cameras. It adapts the camera base to 4-inch round and 4-inch octagon boxes, so the camera can be fixed to existing electrical boxes. It is intended for outdoor use.
Mounts
PMAX-0807
Gang Box Converter for PMAX-0102, 0312, 0313, 0314
The PMAX-0807 is a gang box converter for PMAX-0102, PMAX-0312, PMAX-0313 and PMAX-0314 mounts. It adapts the camera base to two-gang boxes, so the camera can be fixed to existing electrical boxes. It is intended for indoor/outdoor use.
Mounts
PMAX-0808
Converter Ring, 1.5" NPT
The PMAX-0808 adapts a camera to mounting accessories with a 1.5" NPT thread. It lets you use third-party poles, arms and brackets without changing the camera. It is rated for indoor/outdoor installation.
Mounts
PMAX-0810
Mount Kit and Converter Ring, 1.5" NPT
The PMAX-0810 is a mount kit with a 1.5" NPT converter ring for A8x cameras, except A88. It allows these cameras to be attached to third-party poles, arms and brackets. It is rated for indoor and outdoor installation.
Mounts
PMAX-0812
Gang Box Converter for A88, A92, A94, A96
The PMAX-0812 is a gang box converter for A88, A92, A94 and A96 cameras. It adapts the camera base to 4-inch round and 4-inch octagon boxes, so the camera can be fixed to existing electrical boxes.
Mounts
PMAX-0813
Gang Box Converter for A8x
The PMAX-0813 is a gang box converter for A8x cameras (except A88). It adapts the camera base to two-gang boxes, so the camera can be fixed to existing electrical boxes. It is intended for indoor/outdoor use.
Mounts
PMAX-0816
Converter Ring, 1.0" NPT, White
The PMAX-0816 adapts a camera to mounting accessories with a 1.0" NPT thread. It lets you use third-party poles, arms and brackets without changing the camera.
Mounts
PMAX-0820
Gang Box Converter for A71, A74, A77, Z91, Z94, Z95
The PMAX-0820 is a gang box converter for A71, A74, A77, Z91, Z94 and Z95 cameras. It adapts the camera base to 4-inch round and 4-inch octagon boxes, so the camera can be fixed to existing electrical boxes.
Mounts
PMAX-0822
Gang Box Converter for A711 and A713
The PMAX-0822 is a gang box converter for A711 and A713 cameras. It adapts the camera base to an electrical box. Box type, material and dimensions are not specified.
Mounts
PMAX-0901
Magnetic Desktop Base for Micro Box Cameras
The PMAX-0901 is a desktop stand for micro box cameras. A magnetic base holds the camera in place on a desk or shelf. It is intended for indoor use.
Mounts
PMAX-1003
Flush Mount Kit for D6x, D7x, D8x, E61 to E67, E7x (except E78) and E81 to E88
The PMAX-1003 is a flush mount kit for D6x, D7x, D8x, E61 to E67, E7x (except E78) and E81 to E88 cameras. It lets the camera sit recessed in the ceiling surface. It is intended for indoor/outdoor use.
Mounts
PMAX-1006
Flush Mount Kit for D5x and E5x
The PMAX-1006 is a flush mount kit for D5x and E5x cameras. It lets the camera sit recessed in the ceiling surface. It is intended for indoor use.
Mounts
PMAX-1010
Flush Mount Kit for I91, I92 and KCM-8111
The PMAX-1010 is a flush-mount kit for I91, I92 and KCM-8111 cameras. It lets the camera sit recessed in a ceiling or wall surface rather than hanging below it. Use it where a low-profile installation is required.
Mounts
PMAX-1011
Flush Mount Kit for B511
The PMAX-1011 is a flush-mount kit for the B511 camera. It lets the camera sit recessed in a ceiling or wall surface rather than hanging below it. Use it where a low-profile installation is required.
Mounts
PMAX-1012
Flush Mount Kit for B6x
The PMAX-1012 is a flush-mount kit for B6x cameras. It lets the camera sit recessed in a ceiling or wall surface rather than hanging below it. Use it where a low-profile installation is required.
Mounts
PMAX-1013
Flush Mount Kit for B8x and B9x
The PMAX-1013 is a flush-mount kit for B8x and B9x cameras. It lets the camera sit recessed in a ceiling or wall surface rather than hanging below it. Use it where a low-profile installation is required.
Mounts
PMAX-1014
Flush Mount Kit for E610
The PMAX-1014 is a flush-mount kit for the E610 camera. It lets the camera sit recessed in a ceiling or wall surface rather than hanging below it. Use it where a low-profile installation is required.
Mounts
PMAX-1015
Flush Mount Kit for B71, E89, E815-E817 and E822
The PMAX-1015 is a flush-mount kit for B71, E89, E815 to E817 and E822 cameras. It lets the camera sit recessed in a ceiling or wall surface rather than hanging below it. Use it where a low-profile installation is required.
Mounts
PMAX-1017
Tiltable Flush Mount for Pinhole Covert Cameras
The PMAX-1017 is a flush mount for pinhole covert cameras that allows the viewing angle to be adjusted after installation. It is made of aluminium and intended for indoor use. A low-profile body keeps the installation discreet.
Mounts
PMAX-1019
Flush Mount Kit for B9xA and B910
The PMAX-1019 is a flush-mount kit for B9xA and B910 cameras. It lets the camera sit recessed in a ceiling or wall surface rather than hanging below it. Use it where a low-profile installation is required.
Mounts
PMAX-1027
Flush Mount Kit for A61, A62 and A8x (except A88)
The PMAX-1027 is a flush-mount kit for A61, A62 and A8x cameras (A88 excluded). It lets the camera sit recessed in a ceiling or wall surface rather than hanging below it. Use it where a low-profile installation is required.
Mounts
PMAX-1028
Flush Mount Kit for B74A, B76A and B77A
The PMAX-1028 is a flush-mount kit for B74A, B76A and B77A cameras. It lets the camera sit recessed in a ceiling or wall surface rather than hanging below it. Use it where a low-profile installation is required.
Mounts
PMAX-1030
Flush Mount Kit for A811, A813 and A818
The PMAX-1030 is a flush-mount kit for A811, A813 and A818 cameras. It lets the camera sit recessed in a ceiling or wall surface rather than hanging below it. Use it where a low-profile installation is required.
Mounts
PMAX-1031
Flush Mount Kit for Z83 and Z84
The PMAX-1031 is a flush-mount kit for Z83 and Z84 cameras. It lets the camera sit recessed in a ceiling or wall surface rather than hanging below it. Use it where a low-profile installation is required.
Mounts
PMAX-1032
Flush Mount Kit for A71, A74, A77, E78, E79 and E710
The PMAX-1032 is a flush-mount kit for A71, A74, A77, E78, E79 and E710 cameras. It lets the camera sit recessed in a ceiling or wall surface rather than hanging below it. Use it where a low-profile installation is required.
Mounts
PMAX-1033
Flush Mount Kit for A711 and A713
The PMAX-1033 is a flush-mount kit for A711 and A713 cameras. It lets the camera sit recessed in a ceiling or wall surface rather than hanging below it. Use it where a low-profile installation is required.
Mounts
PMAX-1034
Flush Mount Kit for Q83
The PMAX-1034 is a flush-mount kit for the Q83 multi-imager dome camera. It lets the camera sit recessed in a ceiling or wall surface rather than hanging below it. Use it where a low-profile installation is required.
Mounts
PMAX-1035
Flush Mount Kit for A826
The PMAX-1035 is a flush-mount kit for the A826 camera. It lets the camera sit recessed in a ceiling or wall surface rather than hanging below it. Use it where a low-profile installation is required.
Mounts
PMAX-1036
Flush Mount Kit for Z959
The PMAX-1036 is a flush-mount kit for the Z959 speed dome camera. It lets the camera sit recessed in a ceiling or wall surface rather than hanging below it. Use it where a low-profile installation is required.
Mounts
PMAX-1105
Bracket for B2x Indoor Box Cameras
The PMAX-1105 is a bracket for mounting B2x box cameras indoors. It is a lightweight plastic part in Warm Gray, suited to ceiling or wall installations in offices and retail spaces.
Mounts
PMAX-1106
Aluminium Bracket for Outdoor-Housing Box Cameras
The PMAX-1106 is an aluminium bracket for box cameras fitted in outdoor housings. It is specified for KCM-5211E, KCM-5511 and KCM-5611, and for other box cameras installed in an outdoor housing.
Mounts
PMAX-1107
Aluminium Bracket for D3x, D4x, E3x, E41-E43 and E47 Bullet Cameras
The PMAX-1107 is an aluminium mounting bracket for bullet cameras. It is intended only for the D3x, D4x, E3x, E41 to E43 and E47 models.
Mounts
PMAX-1108
Bracket for Covert Cameras
The PMAX-1108 is a small aluminium bracket that fits covert cameras. L-shape pinhole cameras are the one exception. It is finished in black for unobtrusive indoor installations.
Mounts
PMAX-1110
Gooseneck Bracket for Micro Box Cameras
The PMAX-1110 is a gooseneck bracket for micro box cameras. The flexible arm allows the camera to be pointed freely once the bracket is in place. It is intended for indoor use.
Mounts
PMAX-1111
Edge Clamp for Micro Box Cameras
The PMAX-1111 is a clamp-style mount for micro box cameras. It grips an edge or pole without drilling, with a maximum supported pole diameter of 1.26 in. It is made of plastic and aluminium for indoor use.
Mounts
PMAX-1118
Stainless Steel 316 Bracket for PMAX-0233 to PMAX-0236
The PMAX-1118 is a bracket made from 316 stainless steel, matched to the PMAX-0233, PMAX-0234, PMAX-0235 and PMAX-0236 units. At 1611 g it is a heavy-duty mounting part for demanding environments.
Mounts
PMAX-1119
Camera Mount
The PMAX-1119 is a camera mount in the mounting accessories range. It is cross-referenced with the PMAX-0239 to PMAX-0242 positioning housings. Further specifications will be added when available.
Mounts
PMAX-1121
Aluminium Alloy Bracket for Q170
The PMAX-1121 is a compact bracket made for the Q170 camera. It is built from aluminium alloy with a black finish and weighs about 125 g.
Mounts
PMAX-1123
Camera Mount
The PMAX-1123 is a camera mount in the mounting accessories range. It is cross-referenced with the A432 and A432-P1 bullet cameras. Further specifications will be added when available.
Mounts
PMAX-1200
19-inch Rackmount Rails for Standalone NVRs
The PMAX-1200 is a pair of rackmount rails for placing standalone NVRs in a standard 19-inch rack. The rails extend to suit different rack depths, which helps in server rooms and control rooms with mixed equipment. They are intended for the NVR models listed below.
Mounts
PMAX-1202
19-inch Rackmount Rails for CMS-200, ENR-190, ENR-420, ENR-421 and LPR-120
The PMAX-1202 is a pair of 19-inch rackmount rails for installing standalone recorders in an equipment rack. The rails extend to 26.4 in to suit different rack depths. It fits the CMS-200, ENR-190, ENR-420, ENR-421 and LPR-120.
Mounts
PMAX-1203
26-inch Rackmount Rails for CMS-200, ENR-190, ENR-420, ENR-421 and LPR-120
The PMAX-1203 is a longer rail set for mounting standalone recorders in deeper racks. The 25.6 in rails extend to 33.4 in. It fits the CMS-200, ENR-190, ENR-420, ENR-421 and LPR-120.
Mounts
PMAX-1204
Rack Bracket for ZNR-220P and ZNR-221P
The PMAX-1204 is a rack bracket for installing ZNR-220P and ZNR-221P recorders in an equipment rack. It is a light part at 87 g.
Mounts
PMAX-1205
Rack Bracket for ZNR-421 and ZNR-423
The PMAX-1205 is a rack bracket for standalone NVRs. It is intended for the ZNR-421 and ZNR-423 recorders and lets them be installed in a standard equipment rack.
Mounts
PMAX-1208
20-inch Rackmount Rails for CMS-201, PCR-204 and ACS-402
The PMAX-1208 is a 20-inch rackmount rail kit for standalone server and recorder units. It is specified for the CMS-201, PCR-204 and ACS-402 and supports rack-based deployments.
Mounts
PMAX-1211
Standalone NVR Mount
The PMAX-1211 is a mounting accessory in the standalone NVR mount category. The available data does not list compatible models, material or dimensions, so confirm fit before ordering.
Mounts
PMAX-1300
Aluminum Ceiling Bracket for B4x Cameras
The PMAX-1300 is a ceiling bracket for the B4x camera family. It is made of aluminum with a warm gray finish and is rated for outdoor application environments.
Mounts
PMAX-1400
Aluminum Mount Kit for D5x, D9x, E5x, E78, E9x and E9xx/M
The PMAX-1400 is a mount kit covering the D5x, D9x, E5x, E78, E9x and E9xx/M camera series. It is an aluminum part in warm gray that can be used indoors or outdoors.
Mounts
PMAX-1402
White Aluminum Mount Kit for Z91, Z97, Z98, Z710, Z714, Z715, A71, A76, A77
The PMAX-1402 is a mount kit for the Z91, Z97, Z98, Z710, Z714, Z715, A71, A76 and A77 cameras. It is built from aluminum with a white finish.
Mounts
PMAX-1403
White Ceiling Mount for Z95x and K95x Cameras
The PMAX-1403 is a ceiling mount designed for the Z95x and K95x camera series. It has a white finish and a low-profile round body.
Mounts
PMAX-1404
White Mount Kit for Q83 Cameras
The PMAX-1404 is a mount kit for the Q83 camera, supplied in white. Dimensions, weight and material are not given in the available data.
Mounts
PMAX-1405
White Mount Kit for A826 Cameras
The PMAX-1405 is a mount kit for the A826 camera, supplied in white. Dimensions, weight and material are not given in the available data.
Mounts
PMAX-1406
Mount Kit for Z959 Cameras
The PMAX-1406 is a camera mount kit for the Z959. No finish, material or dimensions are listed, so check the physical specification before planning an installation.
Mounts
PMAX-1407
Mount Kit for Q84 Cameras
The PMAX-1407 is a camera mount kit for the Q84. The data lists no finish, material, weight or dimensions.
Mounts
PMAX-1501
PF 3/4" Nylon Cable Gland for Outdoor Domes
The PMAX-1501 is a cable gland that seals the cable entry on outdoor dome cameras. It suits cables of 4.3 to 6.4 mm and is not intended for hemispheric domes.
Mounts
R706-00006
Integrated Bracket for B41x, B43, I42, I48, E413, E415 and E417 Bullet Cameras
The R706-00006 is an integrated mounting bracket for bullet cameras. It fits the B41x, B43, I42, I48, E413, E415 and E417 and is made of aluminum.
Mounts
R707-40001
Surface Mount for Indoor PTZ Cameras
The R707-40001 is a surface mount for indoor PTZ cameras. It is white and combines plastic and aluminum parts.
Mounts
R707-A0002
Bundled Flush Mount for Fisheye Covert Cameras
The R707-A0002 is a flush mount bundled with a fisheye covert camera. It weighs only 12.5 g.
Mounts
R707-A0004
Bundled Surface Mount for L-Shape Pinhole Covert Cameras
The R707-A0004 is a surface mount bundled with L-shape pinhole covert cameras. It is a white plastic part weighing 70 g.
Mounts
R707-A0005
Bundled Tilted Mount for L-Shape Pinhole Covert Cameras
The R707-A0005 is a tilted mount bundled with L-shape pinhole covert cameras. It is a white plastic part weighing 20.5 g.
Mounts
R707-A0007
Bundled Mounting Rail Kit for Covert Cameras
The R707-A0007 is a mounting rail kit bundled with covert cameras. It is made of silver aluminum and weighs 21.5 g.
Mounts
R708-10000
Bundled Bracket for Q22 Cameras
The R708-10000 is a bracket bundled with the Q22 camera. It weighs 115.56 g; material and finish are not listed.
Power & PoE
PPBX-0016
12V 5A Power Adapter for R7 Series
The PPBX-0016 is a mains power adapter that delivers 12 V DC at up to 60 W. It is supplied with universal connectors and is intended for the R7 series.
Power & PoE
PPBX-0020
AC 24V 2A Power Adapter for PLED-0207, 0208, 0209
The PPBX-0020 supplies 24 V AC at 2 A. It is the matched power source for the PLED-0207, PLED-0208 and PLED-0209 IR illuminators.
Power & PoE
PPBX-0023
12V 2A Power Adapter with DC Plug (US)
The PPBX-0023 is a compact 12 V, 2 A adapter with a US plug and DC connector. It powers cameras such as the A317, A422, A423, K371, K372, Z415, Z416 and Z972, including their listed variants.
Power & PoE
PPBX-0026
12V Power Adapter AC 100-240V (US)
The PPBX-0026 is a small wall adapter with a US plug and a 12 V DC output. It is listed for several camera families and carries FCC, UL and Level VI efficiency approvals.
Power & PoE
PPBX-0033
48V 3.75A Power Adapter for I98 and I915
The PPBX-0033 converts mains power to 48 V DC for the I98 and I915. Its output rating falls with temperature, from 180 W at 25°C to 90 W at 60°C.
Power & PoE
PPBX-0036
12 V / 2 A Power Adapter for ECD-1100
The PPBX-0036 is a replacement or spare power supply for the ECD-1100. It accepts mains from 100 to 240 V AC and outputs a regulated 12 V DC at 2 A. It ships with a US-type connector and is made in Taiwan.
Power & PoE
PPOE-0201
90 W Single-Port Gigabit PoE Injector (802.3bt)
The PPOE-0201 adds PoE to a single Ethernet run, supplying up to 90 W under IEEE 802.3bt Type 4. It is intended for power-hungry cameras that exceed standard PoE budgets, such as the Z953, Z954, Q83 and Q84. The unit works from universal AC mains and is for indoor use.
Power & PoE
PPOE-0202
90W Multi-Gigabit High PoE Injector
The PPOE-0202 adds PoE to one Ethernet link at up to 90 W. It is listed for the A952, A956, Z953, Z954, Q83 and Q84, and supports 10/100/1000M and multi-gigabit links.
Power & PoE
PPOE-0302
60W 4-Pair Gigabit High PoE Injector
The PPOE-0302 supplies up to 60 W to one PoE device over a gigabit link. It is specified for the A967 and A967B cameras.
Lenses
PLEN-0101
f4.2mm F1.8 Fixed Lens, CS Mount
The PLEN-0101 is a fixed focal length lens for cameras with a CS mount. Its F1.8 aperture suits low-light scenes, and focus is set manually during installation.
Lenses
PLEN-0114
f4.2mm F1.8 Fixed Lens, Board Mount
The PLEN-0114 is a compact fixed lens for cameras that use a board-mount interface. It has a fixed focus, so no focus adjustment is needed after installation.
Lenses
PLEN-0130
f2.93mm Fixed Lens, CS Mount
The PLEN-0130 is a fixed-focal CS-mount lens with a wide field of view for general-purpose indoor and outdoor cameras. It is a manual-focus, fixed-iris design suited to 1/2.7" sensors. Its low weight keeps it easy to fit into compact camera bodies.
Lenses
PLEN-0131
f2.8-12mm F1.4 Vari-focal Lens, CS Mount
The PLEN-0131 is a vari-focal lens that lets the installer set the field of view on site. A wide F1.4 aperture supports low-light imaging on CS-mount cameras.
Lenses
PLEN-2103
f4.0mm F2.0 Fixed Lens, CS Mount
The PLEN-2103 is a fixed 4.0 mm lens for CS-mount cameras with larger sensors. A fixed iris keeps the optical setup simple for general surveillance use.
Lenses
PLEN-2200
Vari-focal 3.1-13.3mm DC-Iris Lens, CS Mount
The PLEN-2200 is a CS-mount vari-focal lens that lets installers set the field of view on site, from wide to narrow. A DC iris adjusts exposure automatically in changing light. It supports sensors up to 1/2.3" and uses manual focus.
Lenses
PLEN-2205
f2.8-12mm F1.4 IR-Corrected P-Iris Vari-focal Lens
The PLEN-2205 is a vari-focal lens with IR correction for day and night use. P-Iris control lets a compatible camera manage the aperture precisely.
Lenses
PLEN-2206
f2.8-8.5mm F1.2 P-Iris Vari-focal Lens
The PLEN-2206 is a light, bright vari-focal lens for CS-mount cameras. Its F1.2 aperture and P-Iris control support consistent image quality as lighting changes.
Lenses
PLEN-2213
f5.0-50mm F1.4 DC-Iris Vari-focal Lens
The PLEN-2213 is a long-range vari-focal lens for CS-mount cameras that monitor distant areas. A DC iris adjusts the aperture automatically as light changes.
Lenses
PLEN-4101
f1.9mm F2.8 Fixed Board Mount Lens
The PLEN-4101 is a very small wide-angle lens for compact board-mount cameras. It is fixed focus and fixed iris, and weighs only 5 g.
Lenses
PLEN-4102
2.55 mm Fixed Board Lens
The PLEN-4102 is a small board-mount lens with a fixed 2.55 mm focal length. Its fixed iris and fixed focus keep setup simple for compact camera heads. It supports day/night operation and is made for 1/2.3-inch sensors.
Lenses
PLEN-4105
f2.1mm F1.8 Fixed Board Mount Lens
The PLEN-4105 is a wide-angle fixed lens for board-mount cameras. Its F1.8 aperture and day/night capability suit compact indoor and low-light installations.
Lenses
PLEN-4503
Pinhole f2.8mm Fixed Lens, Mini Mount
The PLEN-4503 is a pinhole lens for discreet installations where only a very small lens opening should be visible. It connects through a 2 m cable and is fixed focus with a fixed iris.
Lenses
PLEN-4504
Pinhole f3.7mm Fixed Lens, Mini Mount
The PLEN-4504 is a pinhole lens for discreet installations where only a very small lens opening should be visible. It connects through a 2 m cable and is fixed focus with a fixed iris.
Lenses
PLEN-4505
Pinhole f3.7mm Fixed Lens, Mini Mount
The PLEN-4505 is a pinhole lens for discreet installations where only a very small lens opening should be visible. It connects through a 2 m cable and is fixed focus with a fixed iris.
Lenses
PLEN-4506
Pinhole f2.8mm Fixed Lens, Board Mount (M12)
The PLEN-4506 is a pinhole lens for discreet installations where only a very small lens opening should be visible. It connects through a 2 m cable and is fixed focus with a fixed iris.
Lenses
PLEN-4507
Pinhole f4.0mm Fixed Lens, Board Mount (M12)
The PLEN-4507 is a pinhole lens for discreet installations where only a very small lens opening should be visible. It connects through a 2 m cable and is fixed focus with a fixed iris.
Housings
PMAX-0200
Outdoor Box Camera Housing with Heater and Fan, 110V
The PMAX-0200 is an outdoor housing for box cameras with a built-in heater and fan for temperature control. The aluminum body is rated IP66 and the housing operates from -30°C to 50°C on 110V.
Housings
PMAX-0202
Outdoor Box Camera Housing
The PMAX-0202 is a compact outdoor housing for box cameras. It has an aluminum body with CE and IP66 approvals and no heater or fan listed.
Housings
PMAX-0203
Heavy Duty Outdoor Housing with Heater, Fan and Bracket, 230V
The PMAX-0203 is a heavy-duty outdoor housing for box cameras, supplied with a mounting bracket. A heater and fan regulate the interior, and the metal casing is rated IP68 and IK10.
Housings
PMAX-0204
Heavy-Duty Outdoor Box Camera Housing with Heater and Fan, 110V
The PMAX-0204 is a weather-sealed housing for box cameras installed outdoors. A built-in heater and fan help keep the camera within its working temperature across wide climate swings. The kit includes a mounting bracket and runs from 110V AC.
Housings
PMAX-0206
PoE Heavy Duty Outdoor Housing with Heater, Fan, Defogger and Bracket
The PMAX-0206 is a heavy-duty outdoor housing for box cameras that is powered over High PoE. It adds a defogger to the heater and fan, includes a bracket, and has an IP68, IK10 metal casing.
Housings
PMAX-0208
PoE Explosion Proof Box Camera Housing with Heater, Fan and Bracket
The PMAX-0208 is an explosion proof housing for box cameras in hazardous areas. It is built of 316 stainless steel, rated IP68, and is powered over High PoE with a maximum draw of 25.5 W.
Housings
PMAX-0210
PoE Stainless Steel Housing with Heater, Fan and Bracket
The PMAX-0210 is a cylindrical outdoor housing in 316 stainless steel for box cameras. It is rated IP68 and NEMA 4X, uses a heater and fan, and is powered over High PoE.
Housings
PMAX-0221
PoE Explosion-proof SUS316 Positioning Housing with Heater, Fan and IR
The PMAX-0221 is an explosion-proof pan-tilt housing in 316 stainless steel for cameras in hazardous locations. It adds 18 IR LEDs with 100 m working distance, plus a heater and fan.
Housings
PMAX-0222
PoE Explosion-proof SUS316 Positioning Housing with Fan and Heater
The PMAX-0222 is an explosion-proof pan-tilt positioning housing made of 316 stainless steel. A heater and fan manage the internal temperature, and it has no IR illumination.
Housings
PMAX-0228
PoE Explosion Proof Housing with Heater, Fan, IR and Bracket
The PMAX-0228 is an explosion proof housing in 316 stainless steel with an integrated pan-tilt mechanism. It has 18 IR LEDs reaching 100 m, along with a heater, fan and mounting bracket.
Housings
PMAX-0233
PoE Explosion Proof Housing with Heater, IR and Fan for E2X, B2X, A2X
The PMAX-0233 is a PoE explosion proof housing for E2X, B2X and A2X cameras. It combines 850 nm IR illumination reaching 100 m with a heater and fan, and operates from -40°C to 60°C.
Housings
PMAX-0234
PoE Stainless Steel Housing with Heater, IR and Fan for E2X, B2X, A2X
The PMAX-0234 is a PoE-powered stainless steel housing for E2X, B2X and A2X cameras. It provides IR illumination to 100 m together with a heater and fan, in an IP68-rated body.
Housings
PMAX-0235
PoE Explosion-Proof Box Camera Housing with Heater and Fan
The PMAX-0235 is an explosion-proof housing for box cameras installed in hazardous areas. It is built from stainless steel and includes a heater and a fan for temperature control, with PoE power input. It is intended for the E2X, B2X and A2X camera series.
Housings
PMAX-0236
PoE Stainless Steel Housing with Heater and Fan
The PMAX-0236 protects box cameras in harsh outdoor conditions, with a heater and fan to manage temperature. A single PoE (IEEE 802.3at) connection powers both the housing and the camera. It is made for the E2X, B2X and A2X camera families.
Housings
PMAX-0237
PoE PTZ Explosion-Proof Housing with Ceiling Bracket
The PMAX-0237 houses PTZ cameras that must operate in explosion-risk areas. It comes with a ceiling-mount bracket and is made of stainless steel. It is designed for the B913, B923 and B934 cameras.
Housings
PMAX-0238
PoE PTZ Stainless Steel Housing with Wall Bracket
The PMAX-0238 is a weatherproof stainless steel housing for outdoor PTZ cameras, delivered with a wall-mount bracket. It protects B913, B923 and B934 units in harsh environments and is intended for PoE-powered installations.
Housings
PMAX-0239
Explosion-Proof Positioning Housing with Fan, Heater and Wiper
The PMAX-0239 is a positioning housing for cameras that operate in explosion-risk areas. A fan, heater and wiper help keep the camera usable across changing weather. It is designed for the E2X, B2X and A2X series.
Housings
PMAX-0240
Stainless Steel PTZ and Positioning Housing
The PMAX-0240 is a stainless steel positioning housing for demanding installations. It runs from a universal AC supply, and its power figure is quoted with the heater on.
Housings
PMAX-0241
ATEX Positioning Housing with IR LED, Wiper, Fan and Heater
The PMAX-0241 is a stainless steel positioning housing with infrared illumination, pan and tilt movement, wiper, fan and heater. It carries ATEX approvals for explosive atmospheres and mounts on a wall.
Housings
PMAX-0242
Stainless Steel PTZ and Positioning Housing with Wiper
The PMAX-0242 is a heavy-duty positioning housing that gives a camera 360° pan and a -90° to 90° tilt range. Stainless steel 316 construction, a wiper, a heater and a fan suit harsh outdoor and coastal conditions. It is controlled over RS-485 and powered from the AC mains.
Dome Covers
PDCX-0104
Smoked Dome Cover for D51, D52, E51
The PDCX-0104 is a replacement smoked dome cover for indoor dome cameras. The tinted cover hides the camera direction, and the unit weighs 50 g.
Dome Covers
PDCX-1105
Smoked Dome Cover for Indoor Dome Cameras
The PDCX-1105 is a replacement smoked dome cover for indoor dome cameras. The tinted shell conceals which way the lens is pointing while protecting the camera from impact. It suits retail, offices and public interiors.
Dome Covers
PDCX-1106
Vandal-Resistant Smoked Dome Cover for Indoor Mini Domes
The PDCX-1106 is a small tinted cover for indoor mini dome cameras. It adds impact protection rated IK08 and conceals the lens direction.
Dome Covers
PDCX-1109
Vandal-Proof Smoked Dome Cover for B6x, B8x, B9x
The PDCX-1109 is a tinted outdoor replacement cover for the B6x, B8x and B9x dome series. It is rated IK10 for impact resistance.
Dome Covers
PDCX-1110
Vandal-Proof Smoked Dome Cover for B7x, I7x
The PDCX-1110 is a compact tinted dome cover for outdoor B7x and I7x cameras. It provides IK10 impact protection at a weight of 20 g.
Dome Covers
PDCX-1112
Vandal-Proof Smoked Dome Cover for E924(M)-E929(M), E933(M)
The PDCX-1112 is a tinted outdoor cover for the E924(M) to E929(M) and E933(M) cameras. It is rated IK10 for impact resistance.
Dome Covers
PDCX-1113
Vandal-Proof Smoked Dome Cover for E78
The PDCX-1113 is a tinted replacement cover for the E78 camera. It is rated IK10 for impact resistance and weighs 40 g.
Dome Covers
PDCX-1114
Dome Cover Shroud for B6x, B8x, Q61, Q81
The PDCX-1114 is a black shroud made for the dome cover of selected camera models. It weighs 350 g.
Dome Covers
R701-50003
Dome Cover Housing with Transparent Dome for E924-E929(M), E933(M)
The R701-50003 is a replacement dome housing supplied with a transparent dome cover. It suits the E924 to E929(M) and E933(M) cameras and weighs 209 g.
Dome Covers
R701-50004
Transparent Dome Cover for E918-E923(M), E936(M), Q91
The R701-50004 is a clear replacement dome cover. It fits several E-series cameras and the Q91, and weighs 5 g.
Dome Covers
R701-50005
Transparent Dome Cover for E924-E929(M), E933(M)
The R701-50005 is a clear replacement dome cover for the E924 to E929(M) and E933(M) cameras. It weighs 16 g.
Dome Covers
R701-60003
Transparent Dome Cover
The R701-60003 is a clear dome cover supplied as a spare or replacement part. It fits the D53, D54, D55 and E52 to E59 camera series. Use it to restore a scratched or damaged dome without replacing the camera.
Dome Covers
R701-70007
Replacement Transparent Dome Cover
The R701-70007 is a transparent dome cover supplied on its own, for replacing a scratched or damaged cover. It fits a defined list of B and E-series dome models. Only the cover is included.
Dome Covers
R701-70009
Transparent Dome Cover for A8x-10A
The R701-70009 is a clear dome cover sold on its own, without housing or electronics. It is intended for A8x-10A cameras that need a new dome after damage or wear.
Dome Covers
R701-70010
Transparent Dome Cover for A811 and A818
The R701-70010 is a spare dome cover for the A811 and A818 cameras. It is supplied as the cover alone, so it suits maintenance and repair work on installed units.
Dome Covers
R701-90002
Dome Cover Housing with IR Board for B74A, B76A, B77A
The R701-90002 is a replacement housing assembly for the B74A, B76A and B77A cameras. It combines the housing, a transparent dome cover and an IR board in one part.
Bullet Covers
R700-00004
Front Cover for E3x Bullet Cameras
The R700-00004 is a front cover for E3x bullet cameras. It serves as a spare part when the original cover is damaged or worn.
Bullet Covers
R700-00005
Front Cover for D4x and E4x Bullet Cameras
The R700-00005 is a spare front cover for the D4x and E4x bullet camera families. The E48 is not covered by this part.
Bullet Covers
R700-00007
Front Cover for Bullet Camera Series
The R700-00007 is a replacement front cover for the bullet camera models listed below. It is useful when a cover is damaged or needs to be replaced during maintenance. Detailed physical specifications are not published.
Bullet Covers
R700-00008
Front Cover for B415, B416, I42 and I48
The R700-00008 is a front cover intended for the B415, B416, I42 and I48 cameras. It is a maintenance part for units whose original cover needs replacing.
Bullet Covers
R706-00004
Back Cover with Network Cable for D4xA, E4xB, E47
The R706-00004 is a rear cover that already carries a network cable. It is a replacement part for the D4xA, E4xB and E47 cameras.
Bullet Covers
R706-00005
Back Cover with Network Cable for E3x
The R706-00005 is a rear cover supplied with a network cable already fitted. It replaces the back cover on E3x cameras, with the E38 excluded.
Illuminators
PLED-0200
10° IR Illuminator, 120 m Range
The PLED-0200 is an infrared light source for night-time coverage at long range. It has a narrow 10° beam at 850 nm and a weatherproof, vandal-resistant casing.
Illuminators
PLED-0201
25° IR Illuminator, 50 m Range
The PLED-0201 adds infrared light to a camera scene where built-in IR is not enough. A narrow 25-degree beam at 850 nm reaches roughly 50 m, and the housing is rated IP66 and IK10. It suits perimeters and long approaches at night.
Illuminators
PLED-0208
IR Illuminator, 30° Beam, 200 m Range
The PLED-0208 is an external infrared light for extending night-time coverage of long-range cameras. Its narrow 30° beam concentrates light on distant targets such as fences and roads. The aluminum housing is rated for outdoor use.
Audio
PMIC-0100
Active Omnidirectional Microphone
The PMIC-0100 is an active condenser microphone with an omnidirectional pickup. It needs 9-12 V DC and connects to cameras that have a line-in audio input.
Audio
PMIC-0200
Passive Omnidirectional Microphone with 3.5 mm Jack
The PMIC-0200 is a small omnidirectional condenser microphone that adds ambient audio to cameras with a 3.5 mm mic-in input. It draws power from the camera, so no separate supply is needed. It comes with a surface mount and a 2 m cable.
Audio
PMIC-0201
Passive Omnidirectional Microphone
The PMIC-0201 is a passive condenser microphone with an omnidirectional pattern. It connects to mic-in inputs through its 2 m cable or a terminal block and needs no extra DC power.
Audio
PSPK-0007
30 W Outdoor Speaker
The PSPK-0007 is a one-way outdoor speaker rated at 30 W for voice announcements. It connects through an RCA jack and ships with a mounting bracket. IP66 protection and a sturdy housing make it suitable for outdoor poles and walls.
Displays
PDIS-0002
Indoor LED Dot Matrix Display, 128 x 32
The PDIS-0002 is an indoor dot matrix display for status and message output. It has 128 x 32 LEDs on a 5 mm pitch, an aluminium extrusion housing and a 10/100 Ethernet port, and accepts commands over Modbus TCP/IP.
Displays
PDIS-0003
Outdoor LED Dot Matrix Display with Ethernet
The PDIS-0003 is an outdoor LED text display for status and instruction messages at gates, car parks and facilities. It connects over Ethernet and is controlled through Modbus TCP/IP, so it can be driven by automation or integration software. A weather-resistant aluminum housing allows outdoor installation.
Controllers
PJSK-0100
USB PTZ Joystick Controller
The PJSK-0100 is a desktop USB joystick for operating PTZ cameras in compatible management software. A Hall-effect three-axis stick gives smooth pan, tilt and zoom control, and 12 buttons handle presets and shortcuts. It is intended for control-room operators using ENR, INR and MNR series systems.
Controllers
PJSK-0102
PTZ Control Joystick with 4-Inch LCD
The PJSK-0102 is a desktop controller for PTZ cameras on the ZNR, YVR and KNR series. It combines a four-dimensional joystick, 36 keys and a monochrome display, and connects by Ethernet or serial.
Cables
PIOC-0200
USB to RS-232 Serial Converter Cable
The PIOC-0200 is an adapter cable that adds an RS-232 serial port to a computer through USB. It lets technicians configure and control serial devices such as PTZ gear and controllers. Its small size makes it convenient as a field service tool.
Cables
PIOC-0400
M12 to RJ-45 Network Cable, 1 m
The PIOC-0400 is a short network patch cable with an M12 connector on one end and RJ-45 on the other. It joins M12-equipped devices to standard Ethernet equipment.
Extenders
PPEX-0102
PoE Extender
The PPEX-0102 is a PoE extender used to lengthen a powered Ethernet link. It is intended for camera positions that sit farther from the switch than a normal run allows. Technical specifications are not published for this product.
No products match these filters.
Choosing the right model
The right accessory often decides how clean and durable an installation is. Mount and housing compatibility is model-specific, so tell us the camera model and the surface and we will confirm the correct part.