Bullet
A427
4MP Deep Learning 4.3x Zoom Bullet Camera with 85 m IR and 150 dB WDR
The A427 is an outdoor 4MP bullet camera with a 4.3x auto-focus zoom lens, intended for sites where the viewing angle must be set after installation. A 1/1.8" sensor, LightGuard and 150 dB WDR keep the image usable in near-darkness and strong backlight. Deep learning analytics add face recognition, counting and object metadata for access and perimeter applications.
All Products
Browse the TactiSight range of cameras, recorders, access control, encoders and accessories. Use the filters to narrow the list.
Bullet
A427
4MP Deep Learning 4.3x Zoom Bullet Camera with 85 m IR and 150 dB WDR
The A427 is an outdoor 4MP bullet camera with a 4.3x auto-focus zoom lens, intended for sites where the viewing angle must be set after installation. A 1/1.8" sensor, LightGuard and 150 dB WDR keep the image usable in near-darkness and strong backlight. Deep learning analytics add face recognition, counting and object metadata for access and perimeter applications.
Bullet
A428
4MP Deep Learning 4.3x Zoom Bullet Camera with 120 fps and 150 dB WDR
The A428 is a 4MP outdoor zoom bullet camera with a motorised 4.3x lens and an IR illuminator. It outputs 120 fps at 1080p for fast-moving subjects and holds detail in extreme contrast with 150 dB WDR. Face recognition, counting and rule-violation detection support entrances, perimeters and monitored work areas.
Bullet
A429
4MP Deep Learning 4.3x Zoom Bullet Camera with ALPR and TPM 2.0
The A429 is a 4MP outdoor zoom bullet camera built for vehicle-oriented applications. It runs automatic licence plate recognition on the camera and reports vehicle type, colour, brand and direction as metadata. High frame rates, 150 dB WDR and an 85 m IR range suit gates, roads and car parks, and a TPM 2.0 module protects stored credentials.
Bullet
A429-P1
4MP 4x Zoom ALPR Bullet Camera with 100 m IR and 150 dB WDR
The A429-P1 is a project-based 4MP outdoor bullet camera for licence plate capture. Its f8.0-32 mm 4x lens and 100 m IR range cover long approach distances, and automatic licence plate recognition runs on the camera. The model is configured for single-lane coverage; availability is by project request.
Bullet
J41
2MP Deep Learning 4.3x Zoom Bullet Camera with 60 m IR and 120 dB WDR
The J41 is an outdoor 2MP bullet camera with a 4.3x auto-focus lens that allows the field of view to be adjusted on site. Adaptive IR reaches 60 m and 120 dB WDR handles high-contrast entrances. Deep learning separates people and vehicles in motion events, and the housing is UL Listed, IP68 and IK10.
Bullet
K41
2MP Deep Learning 4.3x Zoom Bullet Camera with 60 m IR and 130 dB WDR
The K41 is an outdoor 2MP bullet camera with a 4.3x auto-focus lens and three IR LEDs. Extreme WDR at 130 dB keeps detail in scenes with bright backgrounds. Deep learning motion detection separates people from vehicles, and the metal housing is rated IP68 and IK10.
Bullet
K42
4MP 4.3x Zoom Bullet Camera
The K42 is a 4MP outdoor bullet camera with a motorized 4.3x lens and a wide dynamic range of 130 dB, suited to entrances and perimeters with strong contrast. Deep learning analytics cover line crossing, intrusion and tampering. UL Listed housing with vandal resistance supports demanding installations.
Bullet
K43
5MP Deep Learning 4.3x Zoom Bullet Camera with 60 m IR
The K43 is an outdoor 5MP bullet camera with a motorized 4.3x zoom lens, so the field of view can be set after mounting. Adaptive IR and wide dynamic range keep scenes usable at night and in strong contrast. Deep learning analytics filter alerts to people and vehicles, which suits perimeters, car parks and building exteriors.
Bullet
VMGB-370
4MP Thermal and Optical Bullet Camera for Human Body Temperature Screening
The VMGB-370 is a dual-lens bullet camera that screens human body temperature with a 160 x 120 thermal sensor and a 4MP visible-light module. It measures between 30°C and 45°C with ±0.5°C accuracy and raises events when readings exceed limits. Its rated operating range is 10°C to 35°C.
Dome
A811
4MP 5x Zoom Outdoor Dome Camera with 85 m IR and 150 dB WDR
The A811 is a 4MP outdoor dome camera with a 5x lens that is focused electronically during installation. It combines 85 m of IR illumination with 150 dB WDR for entrances and perimeters with mixed lighting. The IP68, NEMA 4X housing is vandal resistant, and the unit holds Taiwan IoT Cybersecurity Certification.
Dome
A820
4MP Deep Learning 5x Zoom Outdoor Dome Camera with 85 m IR
The A820 is a 4MP outdoor dome camera with a 5x auto-focus lens and three IR LEDs. Extreme WDR and 0.001 lux colour sensitivity keep the picture usable around entrances, car parks and building perimeters. Deep learning detects people, vehicles and faces, and the UL Listed IP68 housing withstands outdoor installation.
Dome
A821
6MP Deep Learning 5x Zoom Outdoor Dome Camera with 85 m IR
The A821 is a 6MP outdoor dome camera that adds resolution headroom to the 5x zoom dome format. Its auto-focus lens, three IR LEDs and 150 dB WDR cover wide areas in difficult light. Face, people and vehicle detection run on the camera, and the housing is rated IP68 and IK10.
Dome
A822
8MP Deep Learning 5x Zoom Outdoor Dome Camera with 85 m IR
The A822 is an 8MP outdoor dome camera with a 5x auto-focus lens. The higher resolution extends detection and identification distances compared with lower-resolution models in the same family. Three IR LEDs, 150 dB WDR and on-camera deep learning detection suit wide perimeters and car parks.
Dome
J81
2MP 4.3x Zoom AI Dome Camera
The J81 is a 2MP outdoor dome with a 4.3x motorized zoom lens, letting installers fine-tune coverage after mounting. AI analytics and a rugged IK10 housing support commercial entrances, car parks and perimeters. Card recordings can be backed up to a server through ONVIF.
Dome
K81
2MP Deep Learning 4.3x Zoom Outdoor Dome Camera with 60 m IR and 130 dB WDR
The K81 is a 2MP outdoor dome camera with a 4.3x auto-focus lens for sites where coverage is fine-tuned during installation. It pairs 60 m IR with 130 dB WDR and runs deep learning motion detection on the camera. The IP68, IK10 dome is UL Listed.
Dome
K82
4MP Deep Learning 4.3x Zoom Outdoor Dome Camera with 60 m IR and 130 dB WDR
The K82 is a 4MP outdoor dome camera with a 4.3x auto-focus lens, 60 m IR and 130 dB WDR. The extra resolution extends detection and identification distances over the 2MP K81. Deep learning motion detection runs on the camera, and the dome is UL Listed with IP68 and IK10 ratings.
Dome
K83
5MP Deep Learning 4.3x Outdoor Zoom Dome Camera with 60 m IR
The K83 is an outdoor 5MP dome camera with a 4.3x zoom lens that can be tuned on site. It combines adaptive infrared, extreme WDR and on-camera deep learning detection of people and vehicles. The IK10 housing makes it a fit for entrances, parking areas and other exposed locations.
Dome
VMGB-601
2MP Deep Learning 4.3x Zoom Dome Camera with 140 dB WDR
The VMGB-601 is a 2MP dome camera with a 4.3x lens and a large 1/1.8" sensor. It outputs 60 fps at 1080p and handles extreme contrast with 140 dB WDR. Deep learning detects faces, people and vehicles, and publishes the results as metadata.
Dome
VMGB-602
2MP Deep Learning 4x Zoom Dome Camera with 140 dB WDR
The VMGB-602 is a 2MP dome camera with a narrow 4x f8-32 mm lens for longer viewing distances. It outputs 60 fps at 1080p and handles extreme contrast with 140 dB WDR. Deep learning detects faces, people and vehicles and publishes the results as metadata.
Dome
Z721
4MP Deep Learning Outdoor Mini Dome with M12 Connector and EN50155
The Z721 is a compact 4MP outdoor dome with an M12 network connector for vehicles and other vibration-prone installations. It carries EN50155 vibration approval and IP68, IK10 ratings. Deep learning analytics, 135 dB WDR and 30 m IR cover transport and on-board applications.
Dome
Z812
2MP 4.3x Zoom Outdoor Dome Camera with 60 m IR and 120 dB WDR
The Z812 is a 2MP outdoor dome camera with a 4.3x lens that is focused electronically during installation. Two IR LEDs reach 60 m, and 120 dB WDR keeps detail in contrasty scenes. Object-based analytics and a UL Listed IP68, IK10 housing suit general outdoor surveillance.
Dome
Z813
4MP Deep Learning 4.3x Outdoor Zoom Dome with 60 m IR and 120 dB WDR
The Z813 is a 4MP vandal-resistant zoom dome for outdoor perimeters, car parks and building facades. Its 4.3x lens lets installers set the field of view after mounting, while adaptive IR covers up to 60 m at night. Deep learning classification of people and vehicles reduces false alarms from general motion.
Dome
Z813-P1
4MP Deep Learning 4.3x Outdoor Zoom Dome with 60 m IR and 130 dB WDR
The Z813-P1 is a 4MP outdoor zoom dome that raises dynamic range to 130 dB for entrances and scenes with strong backlight. It adds two-way audio and a digital input and output for connecting local alarm devices. Deep learning detection of people and vehicles supports perimeter and site monitoring.
Dome
Z813-P1-2MP
2MP Deep Learning 4.3x Outdoor Zoom Dome with 60 m IR and 130 dB WDR
The Z813-P1-2MP is the 2MP version of the Z813-P1 zoom dome, built for outdoor sites that need a flexible field of view and strong backlight handling. It combines a 4.3x lens, 60 m IR and 130 dB WDR with deep learning detection. Audio and alarm I/O are included for integration with local devices.
Dome
Z815
2MP Deep Learning 4.3x Outdoor Zoom Dome with 40 m IR and 120 dB WDR
The Z815 is a 2MP outdoor zoom dome for medium-range monitoring where a variable field of view is needed. A 4.3x lens, 40 m adaptive IR and 120 dB WDR cover day and night scenes, and deep learning separates people and vehicles from other motion. Two-way audio and a digital input and output allow local alarm and intercom integration.
Dome
Z816
4MP 4.3x Zoom AI Dome Camera
The Z816 is a 4MP outdoor dome with a motorized 4.3x lens and deep learning analytics. It lets installers adjust the view remotely and supports audio and alarm I/O for more involved projects. A vandal-resistant weatherproof casing suits public-facing spaces.
Dome
Z819
5MP Deep Learning 4.3x Outdoor Zoom Dome with 60 m IR and 130 dB WDR
The Z819 is a 5MP outdoor zoom dome for sites that need more image detail across wide yards and approaches. It pairs a 4.3x lens with 60 m adaptive IR and 130 dB WDR, and uses deep learning to classify people and vehicles. A rugged IP68 and IK10 housing suits unattended installations.
Dome
Z820
2MP Deep Learning 4.3x Outdoor Zoom Dome with 40 m IR and 120 dB WDR
The Z820 is a 2MP outdoor zoom dome for installations where a variable lens and low power draw matter. Its 4.3x lens, 40 m IR and 120 dB WDR are paired with deep learning detection of people and vehicles. It omits the audio and I/O ports found on the Z815.
Dome
Z821
4MP Deep Learning 4.3x Outdoor Zoom Dome with 40 m IR and 120 dB WDR
The Z821 is a 4MP outdoor zoom dome for mid-range coverage of yards, entrances and building perimeters. A 4.3x lens allows the view to be tuned on site, and 40 m IR with 120 dB WDR supports night and backlit scenes. Power draw is 4.9 W over PoE or DC.
Dome
Z822
6MP 4.3x Outdoor Zoom Dome Camera
The Z822 is an outdoor zoom dome with 6MP resolution and a 4.3x optical zoom lens. The adjustable field of view lets installers frame the scene on site. It runs from PoE or 12V DC.
Dome
Z86
4MP 4.3x Outdoor Zoom Dome with 60 m IR and 120 dB WDR
The Z86 is a 4MP outdoor zoom dome with a metal body and plastic dome cover, intended for exposed installations. A 4.3x lens, 60 m IR and 120 dB WDR cover wide and long-range scenes, with analytics for people, vehicles and virtual lines. It accepts PoE or DC 12V power.
PTZ
A952
8MP Deep Learning 22x Outdoor PTZ Camera with 250 m IR and 150 dB WDR
The A952 is an outdoor 8MP PTZ camera with a 22x optical lens and long-range IR for wide-area and perimeter surveillance. It streams 4K at 30 fps and adds auto tracking and on-camera deep learning detection. The IP66, IK10 metal housing includes a heater for cold-climate operation.
PTZ
A955
5MP Deep Learning 40x Outdoor PTZ Camera with 300 m IR and 150 dB WDR
The A955 is an outdoor 5MP PTZ camera with a 40x optical lens for very long-range monitoring of sites such as borders, ports and industrial yards. It combines 300 m IR, 150 dB WDR and up to 60 fps at 1080p with on-camera deep learning detection. The IP66, IK10 housing carries Taiwan IoT Cybersecurity Certification.
PTZ
A956
2MP Deep Learning 40x Outdoor PTZ Camera with 300 m IR and 150 dB WDR
The A956 is an outdoor 2MP PTZ camera with a 40x optical zoom lens and eight IR LEDs reaching 300 m. Its 1080p output at 60 fps suits tracking of moving targets across large areas. On-camera deep learning detects people and vehicles and supplies object metadata.
PTZ
A959
8MP Deep Learning 22x Outdoor PTZ Camera with TPM 2.0 and 250 m IR
The A959 is an outdoor 8MP PTZ camera with a 22x optical lens, 250 m IR and 4K output at 30 fps. Deep learning analytics, auto tracking and ALPR support city, traffic and perimeter projects. A built-in TPM 2.0 module adds hardware-backed security.
PTZ
A981
8MP 30x AI PTZ Camera with 250 m IR
The A981 is an outdoor PTZ delivering 8MP at 60 fps through a 30x optical zoom lens. AI auto tracking, face recognition, counting and license plate recognition address large open areas such as campuses, yards and roadways. Built-in TPM 2.0 adds device-level security.
PTZ
A984
8MP 36x AI PTZ Camera with 300 m IR
The A984 is an outdoor PTZ camera that delivers 8MP video at 60 fps with a 36x optical zoom. Auto tracking, license plate recognition, face recognition and counting make it fit for wide-area, traffic and critical-site surveillance. Built-in TPM 2.0 protects device credentials.
PTZ
B928
5MP 36x Outdoor PTZ Camera with 200 m IR and 120 dB WDR
The B928 is a 5MP outdoor speed dome built for long-range monitoring of large sites. A 36x zoom lens and 200 m adaptive IR let operators identify subjects far from the mount. Its heavy-duty casing and 360° endless rotation suit ports, campuses, highways and industrial perimeters.
Turret
Z510
2MP Deep Learning Outdoor Fixed Turret with Smart Dual Light
The Z510 is a compact 2MP outdoor turret camera with both infrared and white-light illumination. Smart Dual Light runs on IR by default and can switch to white light through configuration, so sites can choose between covert and colour night imaging. On-camera deep learning detects people and vehicles for shops, yards and building perimeters.
Turret
Z511
4MP Deep Learning ColorGuard Outdoor Turret Camera with Smart Dual Light
The Z511 is a 4MP outdoor turret camera with a fixed 2.8 mm lens. Smart Dual Light uses IR by default and can switch to white light through configuration, with ColorGuard for low-light imaging. Deep learning separates people and vehicles in motion detection, and the housing is IP68 and UL Listed.
Turret
Z512
5MP ColorGuard Outdoor Turret Camera
The Z512 is a 5MP outdoor turret camera with ColorGuard imaging and two light sources. It runs infrared by default and can switch to white light for colour evidence. The IP68 housing and -40°C rating suit exposed doorways, yards and storefronts.
Fisheye
A711
12MP Deep Learning Outdoor Hemispheric Dome Camera with 135 dB WDR
The A711 is a 12MP outdoor hemispheric dome that covers a whole area from a single mounting point. Fisheye, dewarped and ePTZ views let operators work with the full image or with virtual PTZ regions. Deep learning analytics, 20 m IR and 135 dB WDR make it suitable for open spaces, lobbies and building exteriors.
Fisheye
A713
5MP Outdoor Hemispheric Dome with 20 m IR and 135 dB WDR
The A713 is a 5MP hemispheric dome that covers a full 197° area from a single outdoor mount. Camera-side dewarping provides fisheye, corner, multiple and ePTZ views, so one device can replace several fixed cameras. TPM 2.0 and 802.1X support help secure it on managed networks.
Fisheye
A912
5MP Indoor Mini Hemispheric Dome Camera with 20 m IR and 130 dB WDR
The A912 is a compact indoor hemispheric dome that covers a full room from a ceiling or wall point. It offers fisheye, dewarped, ePTZ and multiple-view modes, with four IR LEDs for darkness. Heat map and tampering detection, two-way audio and PoE power suit retail and office use.
Fisheye
B511A
12MP Indoor Hemispheric Dome with 20 m IR and 130 dB WDR
The B511A is a 12MP indoor hemispheric dome with a 198.5° overview and a 1/1.7" sensor. It captures a whole room from the ceiling and produces dewarped views for detail. Built-in motion, tracking and line crossing analytics suit retail, lobbies and open offices.
Box
A213
5MP Fixed Box Camera with 150 dB WDR and CS Mount
The A213 is a 5MP box camera for projects that need lens choice or custom housings. A 2.8 mm lens is fitted, and the CS mount accepts DC-iris and P-iris alternatives. Extreme WDR and deep learning detection of faces, people and vehicles make it suitable for entrances and traffic points.
Box
A214
5MP Deep Learning 40x Zoom Box Camera with 150 dB WDR
The A214 is a 5MP zoom box camera for long-range monitoring indoors or outdoors. Its 40x optical lens, 150 dB WDR and 60 fps output handle distant, fast and high-contrast scenes. Deep learning analytics and object metadata support access, traffic and city surveillance projects.
Box
A29
2MP Fixed Box Camera with 150 dB WDR
The A29 is a 2MP box camera for installs that need lens choice and custom housings. Extreme WDR and a high-frame-rate mode handle fast, high-contrast scenes. Deep learning analytics and alarm I/O make it fit for traffic and access-point applications.
Cube
E19
5MP Indoor Cube Camera with 142 dB WDR
The E19 is a compact indoor cube camera that records at 5MP with a fixed 2.8 mm lens and a wide 117.5-degree horizontal view. Extreme WDR keeps both bright windows and dim interiors usable in one scene. It suits offices, retail counters and reception areas where a discreet, single-cable PoE camera is needed.
Cube
Q170
4MP Thermal and Optical Cube Camera
The Q170 pairs a 256 x 192 thermal imager with a 4MP visual camera in a small IP68 cube. It measures temperature at points, areas and lines and notifies when thresholds are crossed. It suits overheating detection and thermal surveillance in equipment rooms and outdoor sites.
Body Worn
PCAM-1600
4MP Body Worn Camera with IR, Image Stabiliser and 16 h Recording
The PCAM-1600 is a compact 4MP body worn camera for security staff and field personnel. It records at up to 2560 x 1440, stabilises video with a gyro sensor and adds IR for dim conditions. A 4000 mAh battery supports up to 16 hours of 1080p recording in power-saving mode.
Body Worn
PCAM-1601
8MP Body Worn Camera with Touch Screen and Face Recognition
The PCAM-1601 is an 8MP body worn camera with a 2.4-inch colour touch screen for review and control on the device. It records up to 4K at 30 fps, with built-in face recognition and IR assist for low light. A removable 3000 mAh battery allows up to 12 hours of 1080p recording.
Body Worn
PCAM-1601-P1
8MP Body Worn Camera
The PCAM-1601-P1 is a rugged body-worn camera that records up to 4K video with a 120-degree view and gyro-based stabilization. A removable 4000 mAh battery and AES256 encrypted video support full-shift field use. It is aimed at security staff, patrol teams and on-site personnel who need reliable recorded evidence.
Body Worn
PCAM-1602
3MP Body Worn Camera with IR and 12-Hour Recording
The PCAM-1602 is a wearable camera for security and field staff who need to record interactions on the move. It stores encrypted video locally, includes a 2-inch display, and has IR for low light. A rechargeable 3500 mAh battery supports up to 12 hours of recording.
Body Worn
PCAM-1603
4MP Body Worn Camera with Display, IR and 60 fps
The PCAM-1603 is a 4MP body worn camera with a small colour display for checking status and playback. It supports 60 fps at 720p, digital image stabilisation and face detection. A 3000 mAh battery gives up to 10 hours of 1080p recording.
Multi-Imager
Q450
8MP 2-Sensor 180° Panoramic Bullet Camera
The Q450 combines two 4MP sensors in a single outdoor bullet housing and stitches their images into a seamless panoramic stream. It replaces a pair of conventional cameras at wide entrances, car parks and building frontages. IP66 and IK10 protection plus a -40°C rating suit exposed installations.
Multi-Imager
Q75
20MP 4-Sensor 180° Outdoor Panoramic Dome with 30 m IR
The Q75 combines four 6MP sensors in a single outdoor dome to deliver a 180° panoramic view. It replaces several separate cameras at wide areas such as car parks, plazas and building frontages. IR illumination and a vandal-resistant housing support round-the-clock outdoor use.
PT Dome
Q750
3MP Outdoor PT Dome with Smart Dual Light
The Q750 is a 3MP outdoor pan-tilt dome with both infrared and white-light illumination. It uses a fast F0.8-class lens for low-light capture and can switch from IR to white light by configuration. Built-in microphone and speaker support two-way audio at small sites and entrances.
Door Stations
Q950
6MP Outdoor Door Station with RFID and Fisheye View
The Q950 is a door station that combines a 6MP wide-angle camera with intercom audio and a built-in RFID card reader. It provides a 198.5° overview with dewarped detail views at entry points. A rugged IP66 and NEMA 4X body, tested to EN 50155 vibration, suits buildings and vehicles alike.
People Counting
Q963
2MP Dual-Lens 3D People Counting Camera with IR
The Q963 is a 2MP people counting camera with two fixed lenses that measure depth for 3D counting. Mounted facing down above a doorway, it counts people crossing a line and reports density. Counting data is kept on the camera for 100 days.
People Counting
VMGB-201
2MP Dual-Lens People Counting Metadata Camera for Tailgating Detection
The VMGB-201 is a two-lens camera that generates people metadata for access control systems. Its main application is detecting tailgating, where more than one person passes on a single credential. Built-in IR and day/night operation allow use at entrances in varied lighting.
NVR
BNR-300
100-Channel 4-Bay Tower Standalone NVR
The BNR-300 is a tower-format standalone recorder for small and mid-sized projects of up to 100 video devices. It runs NVR 3 Business on Windows 11 IoT Enterprise Value and includes four SATA bays, with drives purchased separately. Local display, web and mobile access are all supported.
NVR
GNR-350
100-Channel 6-Bay Tower Standalone NVR
The GNR-350 is a tower standalone NVR for projects of up to 100 video devices that also need POS, access control or network I/O integration. It runs NVR 3 Corporate on an Intel Core i3-14100 platform with six SATA bays, and disks are not supplied. Local display, web and mobile access are supported.
NVR
INR-401
256-Channel 12-Bay RAID 2U Rackmount NVR with Redundant Power
The INR-401 is a 2U rackmount standalone NVR for larger projects of up to 256 video devices. Twelve hot-swappable bays, an add-on hardware RAID card and redundant power supplies support continuous recording. It runs NVR 3 Corporate and handles POS and access control integration with extra licences.
NVR
INR-417
256-Channel 12-Bay RAID 2U Rackmount Standalone NVR
The INR-417 is a 2U rackmount standalone NVR for up to 256 video devices, built around twelve hot-swappable SATA bays and an add-on hardware RAID card. It runs NVR 3 Corporate on Windows 11 IoT Enterprise LTSC and records at up to 550 Mbps. It carries Taiwan IoT cybersecurity certification.
NVR
KNR-220P
16-Channel 2-Bay RAID Rackmount NVR with 16 PoE Ports
The KNR-220P is a 1U standalone NVR with sixteen PoE ports on board, so cameras plug straight into the recorder. Two SATA bays with hardware RAID store the footage, and Deep Learning AI 2.0 adds people and vehicle analytics. It fits small to mid-size installations that want a tidy, single-box system.
Control Center
Backup Server
Channel License, up to 3200 Channels
This licence enables channels on the Backup Server software, which copies recordings from NVR servers to one or more backup sites. It is sold per channel and scales from 1 to 3200 channels. No free channels are included.
Control Center
CMS-100
800-Channel Mini Standalone CMS
The CMS-100 is a small-form-factor standalone central management server for multi-site video systems of up to 800 video devices. It provides live view, e-Map, synchronized playback and video export from one compact unit. It has one SATA bay, and the disk is not included.
Control Center
CMS-201
1U Rackmount Standalone CMS, 6400 Channels
The CMS-201 is a rack-mounted central management system that brings many NVRs, cameras and sites into one operator view. It runs on a preinstalled Windows 11 IoT platform with local multi-monitor output and remote workstation, web and mobile access. It targets large multi-site deployments that need maps, synchronized playback and centralized control.
Control Center
TVW-100
4-Monitor Mini Standalone TV Wall
The TVW-100 is a small standalone video wall controller that drives up to four monitors. It displays live video from a CMS server, plus maps and web content, without a software licence. It suits control rooms and reception areas that need a compact display solution.
Control Center
TVW-301
2-Bay 4-Monitor Tower Standalone TV Wall
The TVW-301 is a tower workstation that shows live video from a CMS server on up to four monitors in a control room or video wall. Two dedicated graphics cards supply the outputs, and each monitor supports layouts up to 225 cells. No software licence is required.
Control Center
TVW-301-A-V06-000
2-Bay 8-Monitor Tower Standalone TV Wall
This tower TV wall server displays live video from a CMS server on up to eight monitors. It uses an Intel Core i7-10700, 32 GB of RAM and two low-profile GeForce RTX 3050 cards, with layouts up to 225 cells per monitor. No software licence is required.
Servers
PCI-101
Fanless Rugged Mobile Server with 4-Port PoE
The PCI-101 is a compact computer for in-vehicle video recording and processing. It is built to MIL-STD-810G and IEC 61373 vibration and shock standards and runs across a -40°C to 70°C range. Four M12 PoE ports power and connect cameras directly, so it suits transit and fleet projects.
Servers
PCI-201
Rugged Server with Core i3-12100E
The PCI-201 is a compact server with an Intel Core i3-12100E, 16 GB DDR5 and Windows 11 IoT Enterprise LTSC. It carries E-Mark and EN 50155 approvals, supports ignition control and has four PoE ports, suiting vehicle and rail installations.
Servers
PCR-204
1U Rackmount Server with Core i7, 4 Bays
The PCR-204 is a 1U rackmount server built on an Intel Core i7-8700 with 16 GB DDR4. It provides dual gigabit ports, PCIe expansion slots and TPM 2.0 for recording and management duties. Storage disks are not included.
Servers
PCS-100
1-Bay Mini Server with Core i5-6500TE
The PCS-100 is a small desktop server with an Intel Core i5-6500TE and 8 GB of RAM. It has two gigabit ports, three display outputs and eSATA for external storage. Storage disks are not included.
Servers
PCS-200
1-Bay Mini Server with Core i7
The PCS-200 is a compact one-bay server that runs Windows 11 IoT Enterprise High End on an Intel Core i7-8700. It offers two gigabit ports, nine USB 3.0 ports and several external storage options. Storage disks are not included.
System Health
SHM-102
200-Channel Mini System Health Management Server
The SHM-102 is a compact standalone server for monitoring the status of recording servers and the cameras beneath them. It supports up to 200 devices and runs on an Intel Core i7-6700TE with 16 GB DDR4 and Windows 10 IoT. A 2 TB disk is installed, and monitoring requires LMAS5000 licenses.
System Health
System Health Management Server
Device Monitoring Licence
This licence allows one NVR or CMS server and the cameras beneath it to be monitored by the SHM-102 System Health Management Server. The software reports abnormal conditions as they occur, so operators learn about failures quickly. It is meant for operations teams that run many recording servers.
Digital Signage
Digital Signage Station 1
Management License for ECD-1000
Digital Signage Station 1 is a Windows-based application for managing and running media files on ECD-1000 media display stations. Each add-on licence covers one station. It is aimed at organizations that publish content to screens from a central PC.
Digital Signage
Media Management Server
Cloud Subscription
The Media Management Server is a subscription service for managing digital signage content, priced per channel per month. The contract runs for 12 months from a start date chosen by the customer. It can also run on a customer-supplied PC, and a standalone appliance, the MMS-100, is available.
Digital Signage
MMS-100
150-Channel Media Management Station
The MMS-100 is a compact 1-bay server for organizing and scheduling digital signage content across up to 150 media display servers. It runs Windows 10 IoT on an Intel Core i5-6500TE with 8 GB RAM and a 256 GB M.2 system drive. Four channel licenses are included, and additional channels need further licensing.
Access Control
Access Control Smart Server
(ACSS) Management Software
ACSS is software for managing facial recognition access control devices from one place. It installs on a Windows PC or laptop without special database setup. A licence is required, and one free licence is included for R1-series controllers.
Access Control
ACS-100
Standalone Access Control Server, 200 Devices
The ACS-100 is a one-bay mini server with Access Control Smart Server software for facial recognition access projects. It supports up to 200 devices and is managed through a web browser. Storage disks are not included.
Access Control
ACS-402
Rackmount Access Control Server, 400 Devices
The ACS-402 is a 1U rackmount server with Access Control Smart Server software, aimed at larger facial recognition access deployments. It supports up to 400 devices and includes one free licence. Storage disks are not included.
Access Control
PACD-0004
Mifare Classic 1K RFID Card, 13.56 MHz
The PACD-0004 is a standard-size proximity card for access control. It follows the Mifare Classic 1K EV1 S50 standard at 13.56 MHz and supports read and write.
Access Control
PACD-0311
UHF e-Tag Label Sticker, 922-928 MHz
The PACD-0311 is a flat UHF RFID sticker for identifying vehicles, assets or items. It uses the 922-928 MHz band and an EPC Class 1 Gen 2 chip. The ultra-thin 25 x 100 mm label applies directly to a surface.
Access Control
PLOC-2002
600 lb Magnetic Lock with Bracket
The PLOC-2002 is an electromagnetic lock supplied with its mounting bracket. It holds a door shut with 600 lb of force and reports door status through a monitoring output. It pairs with card readers and controllers for secured entrances.
Access Control
PLOC-2005
Magnetic Lock with Mounting Brackets, 500 kg Holding Force
The PLOC-2005 is an electromagnetic door lock supplied with its strike plate and mounting brackets. It holds with 500 kg (1200 lb) of force and reports door status through a monitoring output. It suits interior doors in access control installations that use fail-safe locking.
Access Control
PPSH-0102
Stainless Steel Push Button with LED, Silver
The PPSH-0102 is a wall-mount push button for door release and request-to-exit points. The stainless steel plate carries a status LED and offers both normally open and normally closed contacts. It connects to standard access control door circuits.
Access Control
PPSH-0201
Access Control Push Button
The PPSH-0201 is a push button from the access control accessory range. It is intended for door release or request-to-exit use alongside readers and controllers. Detailed electrical and mechanical data is not published for this model.
Access Control
R10C-10
13.56 MHz Mifare Wiegand Card Reader with Keypad
The R10C-10 is an indoor 13.56 MHz reader with an integrated keypad that sends credentials to a controller over Wiegand. It reads Mifare cards to ISO 14443A and supports card, PIN or card-plus-PIN entry. A compact ABS body makes it easy to fit at standard door positions.
Access Control
R10C-14
UHF RFID Reader with Wiegand and RS-485
The R10C-14 is an indoor UHF reader designed for long-range tag identification at gates and doors. It operates at 922-928 MHz and reads EPC Class 1 Gen 2 tags from 4 to 6 m. Wiegand and RS-485 connections allow it to work with existing controllers.
Access Control
R11-20
Multi-Door Access Controller, RS-485 and Wiegand
The R11-20 is an indoor controller that manages several doors from one unit. Readers connect over RS-485 (up to 14) or Wiegand (2), and the unit stores up to 16,000 cards. It handles EM, Mifare and HID Prox credentials.
Access Control
R11C-30
Dual-Band LCD Reader and Controller, 16,000 Cards
The R11C-30 combines a dual-frequency card reader and a door controller in one keypad unit with a 128 x 64 LCD. It reads EM, Mifare and NFC credentials and stores 16,000 cards and 32,000 events locally. Wiegand, RS-485 and relay connections let it manage a door or feed another controller.
Access Control
R11C-310
Dual-Band RFID Reader and Controller, 16,000 Cards
The R11C-310 combines a card reader and a standalone door controller in one wall-mounted unit. It reads both 125 kHz and 13.56 MHz credentials and stores up to 16,000 cards locally. It is suited to single-door or multi-door sites that need PIN-plus-card options and a TCP/IP connection.
Access Control
R11C-33
HID LCD Reader and Controller, 16,000 Cards
The R11C-33 is a keypad reader-controller with a 128 x 64 LCD and a built-in HID module alongside EM, Mifare and NFC reading. It stores 16,000 cards and 32,000 events and drives a door lock directly. Wiegand and RS-485 ports allow integration into larger systems.
Access Control
R11C-34
HID Keypad Reader and Controller, 3,000 Cards
The R11C-34 is a compact outdoor-rated reader-controller with an illuminated touch keypad. It reads EM, Mifare, NFC and HID Prox credentials and stores up to 3,000 cards and events. It operates a door lock relay and accepts an additional Wiegand reader.
Access Control
R11C-37
RFID Reader and Controller, 1,024 Cards
The R11C-37 is a self-contained Mifare reader and controller with room for 1,024 cards. Its slim body fits doors between 40 and 80 mm thick and works with left or right push and pull openings. It is intended for small offices and rooms that need local access control without a separate controller.
Access Control
R12C-31
Dual-Band LCD Reader and Controller with QR Code
The R12C-31 reads 125 kHz and 13.56 MHz cards as well as QR codes, and holds 16,000 cards with a 32,000-event log. A 128 x 64 LCD and a doorbell button support visitor-facing entrances. It connects over TCP/IP, Wiegand and RS-485.
Access Control
R70-41
7-inch Touch Screen Intercom Access Station
The R70-41 is an indoor intercom station with a 7-inch color touch screen for answering door calls over SIP. It connects by Ethernet or Wi-Fi and has relays for two door locks plus alarm inputs and outputs. It can sit on a desk or mount on a wall.
Access Control
R71CF-31
2MP Face and Mifare Card Reader-Controller with 5-inch Touch Screen
The R71CF-31 is a networked access terminal combining a 2MP face camera, a Mifare reader and a 5-inch touch screen. It stores 3,000 faces and 5,000 cards and grants entry by card, face or both. A doorbell button, Wi-Fi and Ethernet suit entrance points that need identity verification.
Access Control
R71CF-311
2MP EM Face Recognition Reader-Controller, 1,500 Faces
The R71CF-311 is an indoor access terminal that verifies people by face, EM card, QR code or a card-and-face combination. It stores 1,500 faces and 3,000 cards and drives a door lock directly. A 4.3-inch touch screen, Ethernet and a supplied 12V adapter simplify installation.
Access Control
R71CF-312
2MP Mifare Face Recognition Reader-Controller, 1,500 Faces
The R71CF-312 is an indoor access terminal combining face recognition, Mifare card reading and QR code entry. It stores 1,500 faces and 3,000 cards and controls a door lock through its own relay. It is supplied with a 12V adapter and connects over Ethernet, RS-485 or Wiegand.
Access Control
R71CF-313
2MP Mifare Face Recognition Reader-Controller, 6,000 Faces
The R71CF-313 is a semi-outdoor access terminal with a 7-inch touch screen and dual 2MP lenses. It stores 6,000 faces and 50,000 cards and verifies by card, face or both from up to 3 m. Gigabit Ethernet, configurable Wiegand and RS-485 connect it to larger access systems.
Access Control
R71CF-315
Face Recognition Reader-Controller with PoE, 3,000 Faces, EM
The R71CF-315 is a weather-resistant face and EM card terminal for wall mounting. It holds 3,000 faces and 3,000 cards, logs up to 150,000 events and runs on DC 12V or PoE. A 4.5-inch touch screen, web client and multi-language interface support day-to-day administration.
Access Control
R71CF-316
Face Recognition Reader-Controller with PoE, 3,000 Faces, Mifare
The R71CF-316 is a weather-resistant face and Mifare card terminal for wall mounting. It holds 3,000 faces and 3,000 cards, logs up to 150,000 events and runs on DC 12V or PoE. A 4.5-inch touch screen and web client support configuration and daily use.
Access Control
R71CF-35
2MP Face and Mifare Terminal with Intercom, 20,000 Faces
The R71CF-35 is a high-capacity access terminal with dual 2MP lenses, a Mifare reader and a 7-inch touch screen. It stores 20,000 faces and 50,000 cards and also serves as an intercom station with two-way audio. Gigabit Ethernet and a 3 m recognition range suit busy building entrances.
Access Control
R71CF-36
2MP Face and Mifare Terminal with Intercom, 5,000 Faces
The R71CF-36 is an access terminal with dual 2MP lenses, a Mifare reader and a 7-inch touch screen. It stores 5,000 faces and 6,000 cards and doubles as an intercom station with two-way audio. It suits mid-size entrances needing face, card or combined verification.
Access Control
R71CF-37
2MP Face and Mifare Terminal with Intercom, 50,000 Faces
The R71CF-37 is an indoor access terminal with dual 2MP lenses, a Mifare reader and a 7-inch touch screen. It stores 50,000 faces and 50,000 cards and also works as an intercom station with two-way audio. Gigabit Ethernet, Wiegand and RS-485 let it fit large entrance projects.
Access Control
R71CF-39
Semi-Outdoor 2MP Face and Mifare Terminal, 100,000 Faces
The R71CF-39 is a semi-outdoor access terminal with an 8-inch touch screen and dual 2MP lenses. It stores 100,000 faces and 100,000 cards and verifies by card, QR code, face or card plus face from up to 3 m. Its IP65 casing and -30°C to 60°C range suit exposed entrances.
Access Control
R72FT-32
Face Recognition and Temperature Screening Reader-Controller
The R72FT-32 is an indoor access terminal that adds a thermal sensor to dual-lens face recognition. It detects face masks, measures body temperature between 30°C and 45°C from 0.3 to 3 m, and reads Mifare, FeliCa and DESFire cards. It holds 100,000 faces and logs up to 150,000 events.
Access Control
R73C-31
EM Card Reader and Controller, 100,000 Cards
The R73C-31 is a Linux-based access controller with a 2.8-inch color screen and a built-in 125 kHz EM card reader. It holds up to 100,000 cards and connects by Ethernet or Wi-Fi. It suits larger sites that need many users on a single standalone door unit.
Access Control
R73C-32
Mifare Reader-Controller with Keypad, 100,000 Cards
The R73C-32 is an indoor Mifare reader-controller with a 2.8-inch color display and an illuminated touch keypad. It stores 100,000 cards and 300,000 events and controls a door lock through its own relay. Gigabit-capable Ethernet, a web client and a bundled 12V adapter simplify deployment.
Encoders
V24
4-Channel H.264 Extended Temperature Video Encoder
The V24 converts up to four analog CVBS cameras into networked H.264 video, letting existing coax installations join an IP system. Its extended temperature range and vibration-proof casing suit roadside cabinets and transport use. It also adds audio, PTZ control, I/O and server-based analytics to legacy cameras.
Mounts
PMAX-0102
Straight Tube Camera Mount
The PMAX-0102 is a straight tube camera mount for indoor and outdoor use. It is made of aluminum with a warm gray finish and weighs 313 g.
Mounts
PMAX-0103
Straight Tube Camera Mount with Bracket
The PMAX-0103 is a straight tube camera mount supplied with a bracket, suitable for indoor and outdoor use. It is made of aluminum with a warm gray finish.
Mounts
PMAX-0104
Extension Tube Camera Mount
The PMAX-0104 is an extension tube that lengthens a camera mount for indoor and outdoor installations. It is made of aluminum with a warm gray finish and is 540.3 mm long.
Mounts
PMAX-0110
Indoor Mount Kit for I91, I92 and KCM-8111
The PMAX-0110 is an indoor mount kit designed for the I91, I92 and KCM-8111 cameras. It is made of aluminum with a warm gray finish.
Mounts
PMAX-0111
Straight Tube Mount for D5x, D9x, E5x, E9x and E9xx/M
The PMAX-0111 is a straight tube mount for the D5x, D9x, E5x, E9x and E9xx/M camera families. It is made of aluminum with a warm gray finish and is rated for indoor and outdoor use.
Mounts
PMAX-0112
Extension Tube for D5x, D9x, E5x, E9x and E9xx/M
The PMAX-0112 is a 24-inch extension tube for mounting the D5x, D9x, E5x, E9x and E9xx/M cameras at a distance from the mounting surface. It is made of aluminum with a warm gray finish and suits indoor and outdoor use.
Mounts
PMAX-0113
Pendant Mount for A8x Cameras (except A88)
The PMAX-0113 is a pendant mount for the A8x camera series, with the exception of the A88. It is made of white aluminum and can be used indoors and outdoors.
Mounts
PMAX-0115
Pendant Mount for A95x, Z95x, K95x and Q84
The PMAX-0115 is a pendant mount for the A95x, Z95x, K95x and Q84 camera families. It is made of aluminum with a white finish.
Mounts
PMAX-0116
200 mm Extension Tube for Z95x, K95x and Q84
The PMAX-0116 is a 200 mm extension tube for mounting the Z95x, K95x and Q84 cameras at a distance from the mounting surface. It is made of aluminum with a white finish.
Mounts
PMAX-0117
500 mm Extension Tube for Z95x, K95x and Q84
The PMAX-0117 is a 500 mm extension tube for mounting the Z95x, K95x and Q84 cameras at a greater distance from the mounting surface. It is made of aluminum with a white finish.
Mounts
PMAX-0122
Straight Tube Mount for A71, A74, A77, A88 and A9x
The PMAX-0122 is a straight tube mount for the A71, A74, A77, A88 and A9x camera series. It has a white finish and weighs 233 g.
Mounts
PMAX-0123
Extension Tube for A71, A74, A77, A88 and A9x
The PMAX-0123 is a 24-inch extension tube for the A71, A74, A77, A88 and A9x camera series. It is made of aluminum with a white finish and suits indoor and outdoor use.
Mounts
PMAX-0126
Straight Tube Mount with Bracket and Converter Ring for Q75
The PMAX-0126 is a straight tube mount with a bracket and a converter ring designed for the Q75 camera. It has a warm gray finish and weighs 650 g.
Mounts
PMAX-0127
Aluminum Mount Kit for Z83, Z84, A811 and A818 Cameras
The PMAX-0127 is a mount kit for fixing compatible cameras to a wall or ceiling surface. It is built from white aluminum and serves the Z83, Z84, A811 and A818 models. The compact 152 mm round body keeps the installation neat.
Mounts
PMAX-0128
Aluminum Alloy Pendant Mount for Z, Q and K Series Cameras
The PMAX-0128 is a pendant mount that hangs a camera below a ceiling or overhead structure. It is made of white aluminum alloy and weighs 210 g. It fits a broad group of Z-series, Q550 and K-series models.
Mounts
PMAX-0130
Aluminum Mount Kit for A, B and E Series Cameras
The PMAX-0130 is a general-purpose mount kit for attaching compatible cameras to a mounting surface. It has a warm gray aluminum body and a 152 mm round footprint. One kit covers a wide range of A, B and E series models.
Mounts
PMAX-0131
Aluminum Alloy Pendant Mount for A912 Camera
The PMAX-0131 is a pendant mount for hanging an A912 camera from a ceiling or overhead support. It is made of white aluminum alloy.
Mounts
PMAX-0132
Anti-Corrosion Pendant Mount for A962 Camera
The PMAX-0132 is an outdoor pendant mount made for the A962 camera. Its aluminum alloy body carries a protective surface coating for coastal and other corrosive environments. The platinum gray unit weighs 750 g.
Mounts
PMAX-0133
Aluminum Alloy Pendant Mount for A573 Cameras
The PMAX-0133 is a tall pendant mount that suspends a camera well below the ceiling line. It is made of white aluminum alloy and fits the A573, A573-P1 and A573-P2 models. The unit weighs 1254 g.
Mounts
PMAX-0134
200 mm Aluminum Alloy Extension Tube for Z, Q and K Series
The PMAX-0134 is a 200 mm extension tube used to increase the drop length of a pendant installation. It is manufactured in white aluminum alloy and matches a broad group of Z-series, Q550 and K-series cameras.
Mounts
PMAX-0135
Pendant Mount for A966, A967 and A972 Cameras
The PMAX-0135 is a pendant mount for suspending cameras from the A966, A967 and A972 families. It is intended for ceiling or overhead installations of these models.
Mounts
PMAX-0136
Aluminum Alloy Pendant Mount for A76D to A822D Cameras
The PMAX-0136 is a pendant mount that suspends compatible A-series cameras from a ceiling or overhead support. It is made of white aluminum alloy.
Mounts
PMAX-0137
Stainless Steel Outdoor Pendant Mount for K9001
The PMAX-0137 is an outdoor pendant mount designed for the K9001 camera. Stainless steel construction suits exposed locations and supports the weight of this larger unit. The mount weighs 2700 g.
Mounts
PMAX-0138
Camera Mount
The PMAX-0138 is a camera mount accessory. Detailed dimensions, materials and the list of compatible cameras are not published for this item, so confirm fitment before ordering.
Mounts
PMAX-0302
Aluminum Gooseneck with Bracket for Indoor and Outdoor Use
The PMAX-0302 combines a gooseneck arm with a mounting bracket, letting a camera be positioned away from the wall and angled as needed. It is made of aluminum and is suitable for both indoor and outdoor locations.
Mounts
PMAX-0303
Aluminum Gooseneck for Indoor and Outdoor Use
The PMAX-0303 is a gooseneck arm for offsetting and aiming a camera from its mounting point. It is made of aluminum and can be installed indoors or outdoors.
Mounts
PMAX-0305
Aluminum Heavy Duty Wall Mount for Indoor and Outdoor Use
The PMAX-0305 is a heavy duty wall mount built from aluminum for cameras that need a solid support arm. It can be used indoors and outdoors.
Mounts
PMAX-0305-K1
Heavy Duty Wall Mount with Endurance Coating for I915-K1 and B915-K1
The PMAX-0305-K1 is a heavy duty wall mount with an endurance coating, specified for the I915-K1 and B915-K1 cameras. It shares the footprint of the standard PMAX-0305 and weighs 941.5 g.
Mounts
PMAX-0310
10-Degree Plastic Tilted Wall Mount for Indoor Hemispheric and Fisheye Cameras
The PMAX-0310 is a low-profile wall mount that angles a hemispheric or fisheye camera instead of pointing it straight down. It is made of plastic, weighs 86 g and is listed for indoor and outdoor use.
Mounts
PMAX-0311
Aluminum L-Type Wall Mount for I91, I92 and KCM-8111
The PMAX-0311 is an L-type wall mount for indoor cameras, built from warm gray aluminum. It supports the I91, I92 and KCM-8111 models and weighs 814 g.
Mounts
PMAX-0312
Aluminum PTZ Wall Mount for Outdoor PTZ and Speed Dome Cameras
The PMAX-0312 is a wall mount for outdoor PTZ and speed dome cameras. It is made of aluminum and weighs 827.5 g. It does not fit the KCM-8211 and TCM-6630.
Mounts
PMAX-0313
Aluminum Heavy Duty Wall Mount for Indoor Dome Cameras
The PMAX-0313 is a heavy duty wall mount for indoor dome cameras. It is made of warm gray aluminum and weighs 975.5 g.
Mounts
PMAX-0316
Aluminum Indoor Wall Mount for D, E Series Cameras
The PMAX-0316 is a compact wall mount for indoor D-series and E-series cameras. It is made of warm gray aluminum and weighs 278.5 g.
Mounts
PMAX-0318
Aluminum Wall Mount for Z and A Series Cameras
The PMAX-0318 is a compact wall mount in white aluminum. It covers a range of Z-series and A-series models and weighs 298.5 g.
Mounts
PMAX-0320
10-Degree Plastic Tilted Wall Mount for Indoor Hemispheric Cameras with IR LED
The PMAX-0320 is a wall mount for indoor hemispheric cameras that include an IR LED. Its 10-degree tilt angles the lens away from the wall plane. The body is plastic and weighs 84.5 g.
Mounts
PMAX-0322
Aluminum Wall Mount for Z950, Z952, Z954, Z956, Z957 and Z958
The PMAX-0322 is a wall mount for the Z950 to Z958 group of cameras. It is built from white aluminum and weighs 825.5 g.
Mounts
PMAX-0330
10-Degree Aluminum Tilted Wall Mount for Outdoor Hemispheric Cameras
The PMAX-0330 is a wall mount that angles an outdoor hemispheric camera by 10 degrees. It is made of aluminum, weighs 208.5 g and is listed for indoor and outdoor use.
Mounts
PMAX-0332
Bronze Height Strip Mount for L-Shape Pinhole Covert Cameras
The PMAX-0332 is a vertical height strip that holds L-shape pinhole covert cameras at a set position along a door frame or similar edge. It is made of bronze-finished aluminum and is intended for indoor use.
Mounts
PMAX-0334
Tiltable Surface Mount for L-Shape Pinhole Covert Cameras
The PMAX-0334 is a very small surface mount for L-shape pinhole covert cameras. It allows the camera angle to be adjusted and weighs only 22 g. It is made of black aluminum for indoor use.
Mounts
PMAX-0335
Silver Tilt Wedge for PMAX-0331 Height Strip Mount
The PMAX-0335 is a tilt wedge that adds a 20-degree angle to the PMAX-0331 strip mount. It is made of silver aluminum for indoor use.
Mounts
PMAX-0336
Bronze Tilt Wedge for PMAX-0332 Height Strip Mount
The PMAX-0336 is a tilt wedge that adds a 20-degree angle to the PMAX-0332 height strip mount. It is made of bronze aluminum for indoor use.
Mounts
PMAX-0338
35-Degree Aluminum Tilted Wall Mount for Fisheye and Hemispheric Cameras
The PMAX-0338 is a wall mount that angles a fisheye or hemispheric camera by 35 degrees for a wider wall-side view. It is made of aluminum, weighs 421.5 g and is listed for indoor and outdoor use.
Mounts
PMAX-0343
Gooseneck with Bracket and Converter Ring for Q75
The PMAX-0343 is a gooseneck and bracket set supplied with a converter ring for the Q75 camera. It lets the camera be offset from its mounting surface and aimed as needed. The assembly weighs 736.5 g.
Mounts
PMAX-0344
Gooseneck Mount with Converter Ring for Q75
The PMAX-0344 is a gooseneck camera mount supplied with a converter ring for the Q75. It lets the camera be positioned and re-aimed without a fixed bracket angle.
Mounts
PMAX-0346
Heavy Duty Wall Mount with Converter Ring
The PMAX-0346 is a heavy duty wall mount that includes a converter ring for larger camera housings. It fits the Q75, A950, A951, A952 and A956.
Mounts
PMAX-0349
Wall Mount with Built-in Junction Box
The PMAX-0349 is a wall bracket with an integrated junction box, so cable connections can be housed at the mounting point. It is intended for the Y7x, Z5x, Z7x and Z91x series.
Mounts
PMAX-0351
Aluminum Wall Mount for Z953, K95X and Q84
The PMAX-0351 is a wall mount for the Z953, K95X and Q84 cameras. It is made from aluminum alloy.
Mounts
PMAX-0354
Heavy Duty Wall Mount for Outdoor Domes
The PMAX-0354 is a heavy duty wall mount for outdoor dome cameras. It is made from aluminum and covers the A711, A713, B8x, B9x and E8x models.
Mounts
PMAX-0355
10-Degree Tilted Wall Mount for A711 and A713
The PMAX-0355 is a low-profile wall mount that angles the camera 10° from the mounting surface. It is rated for indoor and outdoor use with the A711 and A713.
Mounts
PMAX-0356
35-Degree Tilted Wall Mount for A711 and A713
The PMAX-0356 is a wall mount that angles the camera 35° from the mounting surface. It is rated for indoor and outdoor use with the A711 and A713.
Mounts
PMAX-0357
Wall Mount for Select Cameras
The PMAX-0357 is a wall mount bracket that lets compatible cameras be fixed to a vertical surface. It suits installers who need a matching mounting option rather than a generic bracket. Compatibility is listed per camera model.
Mounts
PMAX-0358
Parapet Wall Mount for Z95x, K95X and Q84
The PMAX-0358 is a parapet wall mount for rooftop and ledge installations. It supports the Z95x, K95X and Q84 cameras.
Mounts
PMAX-0359
Wall Mount for A912
The PMAX-0359 is a wall mount made for the A912 camera. It combines plastic and steel parts in a white finish.
Mounts
PMAX-0360
Tilted Wall Mount for A912
The PMAX-0360 is a tilted wall mount for the A912 camera. It is made from plastic in a white finish.
Mounts
PMAX-0362
Anti-Corrosion Wall Mount for A962
The PMAX-0362 is an outdoor wall mount for the A962, built from coated aluminum alloy for coastal and corrosive environments. It is tested to a C5-M equivalent salt spray standard.
Mounts
PMAX-0363
Wall Mount for A573, A573-P1 and A573-P2
The PMAX-0363 is a wall mount for the A573, A573-P1 and A573-P2 cameras. It is made from aluminum alloy in white.
Mounts
PMAX-0365
Wall Mount with Built-in Junction Box
The PMAX-0365 is a wall bracket with an integrated junction box for cable connections. It supports the Y7x, Z5x, Z7x, Z91x, K5x and K7x series.
Mounts
PMAX-0366
Wall Mount with Junction Box for Z9x, Z8x and A7X
The PMAX-0366 is a wall mount with a built-in junction box. It covers the Z9x, Z724, Z77, Z8x, Z972, A7X and Q550 cameras.
Mounts
PMAX-0367
Wall Mount with Junction Box for Z83, Z84, Z810, Z818
The PMAX-0367 is a wall bracket with an integrated junction box for the Z83, Z84, Z810 and Z818 cameras. It is built from white aluminum alloy.
Mounts
PMAX-0368
Wall Mount with Built-in Junction Box for Q711
The PMAX-0368 is a wall mount with a built-in junction box, made for the Q711 camera. It is built from aluminum alloy.
Mounts
PMAX-0370
Camera Mount
The PMAX-0370 is a camera mount accessory. Compatible models and physical specifications are not listed for this item, so confirm fit before ordering.
Mounts
PMAX-0372
Wall Mount for A76D, A77D, A78D and A82xD Series
The PMAX-0372 is a white aluminum alloy wall mount for the A76D, A77D, A78D, A820D, A821D and A822D cameras.
Mounts
PMAX-0373
Wall Mount with Junction Box for A76D, A77D, A78D and A82xD Series
The PMAX-0373 is a wall mount with a built-in junction box for cable connections. It fits the A76D, A77D, A78D, A820D, A821D and A822D.
Mounts
PMAX-0374
Stainless Steel Outdoor Wall Mount for K9001
The PMAX-0374 is an outdoor wall mount for the K9001 camera. It is made from stainless steel in a silver finish.
Mounts
PMAX-0375
Camera Mount
The PMAX-0375 is a camera mount accessory. Compatible models and physical specifications are not listed for this item, so confirm fit before ordering.
Mounts
PMAX-0402
Corner Mount
The PMAX-0402 is a corner mounting bracket that lets a camera be fixed to the outside or inside angle of a wall. It is rated for indoor and outdoor use and finished in warm gray. It gives installers a sturdy base where a flat wall is not available.
Mounts
PMAX-0403
Corner Mount for Covert and Pinhole Covert Cameras
The PMAX-0403 is a lightweight indoor corner mount for covert and pinhole covert cameras. It sets the camera at a 45° angle.
Mounts
PMAX-0404
Aluminum Corner Mount for Z950 and Z952
The PMAX-0404 is a corner mount for mounting the Z950 and Z952 on building corners. It is made from aluminum in white.
Mounts
PMAX-0407
Stainless Steel Corner Mount for A42x, A7xD and A82xD
The PMAX-0407 is a stainless steel corner mount for building corners. It fits several box and dome models listed below.
Mounts
PMAX-0408
Corner Mount for A950
The PMAX-0408 is a corner mount made for the A950 camera, supplied in white.
Mounts
PMAX-0409
Corner Mount for A7x, Z7xx, Z8x, Z9x, Q550 and K Series
The PMAX-0409 is a corner mount that supports a broad set of camera series. Material, color and dimensions are not listed for this item.
Mounts
PMAX-0410
Corner Mount with Junction Box for A966, A967 and A972
The PMAX-0410 is a large corner mount with an integrated junction box. It is rated for indoor and outdoor use and fits the A966, A967, A967B, A967B-2MP and A972.
Mounts
PMAX-0411
Stainless Steel Corner Mount for A427, A428 and A429
The PMAX-0411 is a corner mount made from stainless steel for the A427, A428 and A429 cameras.
Mounts
PMAX-0503
Pole Mount for 5.25 to 8.5 in Poles
The PMAX-0503 is an aluminum pole mount for larger-diameter poles. It attaches the listed mounts and housings to poles of 5.25 to 8.5 in.
Mounts
PMAX-0504
Pole Mount for 3.25 to 7.0 in Poles
The PMAX-0504 is an aluminum pole mount for smaller-diameter poles. It supports the listed B, E and I series cameras and PMAX-0330 on poles of 3.25 to 7.0 in.
Mounts
PMAX-0505
Pole Mount for 2" to 3" Poles
The PMAX-0505 attaches compatible cameras to round poles from 2" to 3" in diameter. It is built from aluminum and suits indoor and outdoor installations. The compatible list covers the B, E and I series plus four PMAX-03xx models.
Mounts
PMAX-0506
Pole Mount for 2" to 3" Poles
The PMAX-0506 is a lightweight aluminum bracket that secures A31, A4x, E78, E9x and E9xx cameras to poles of 2" to 3". It is intended for indoor or outdoor use. The compact body keeps the camera close to the pole.
Mounts
PMAX-0508
Heavy-Duty Pole Mount for 3" to 9" Poles
The PMAX-0508 is an outdoor pole mount covering a wide pole range of 3" to 9". It is designed for the PMAX-0203 to PMAX-0206 mounting parts and the PMAX-0704 junction box. The aluminum body is finished in white.
Mounts
PMAX-0510
Pole Mount for Micro Box and Micro Bullet Cameras
The PMAX-0510 is a small pole bracket for micro box and micro bullet cameras. It clamps to narrow poles from 15 to 40 mm and can be used indoors or outdoors. The body is aluminum with a black finish.
Mounts
PMAX-0511
Pole Mount for 5.25" to 8.5" Poles
The PMAX-0511 mounts A8x cameras on large-diameter poles of 5.25" to 8.5". It is made of aluminum with a white finish and is suitable for indoor and outdoor sites.
Mounts
PMAX-0512
Pole Mount for 3.25" to 7.0" Poles
The PMAX-0512 is an aluminum pole mount for the E39 camera and the PMAX-0706 accessory. It accepts poles from 3.25" to 7.0" and is usable indoors and outdoors.
Mounts
PMAX-0513
Pole Mount for 2.6" to 5" Poles
The PMAX-0513 is a pole mount for the Z950 camera. It clamps to poles of 2.6" to 5" and is made of white aluminum.
Mounts
PMAX-0514
Pole Mount for A950
The PMAX-0514 is a pole mount made for the A950 camera. It weighs 1274 g and is finished in white. Pole range and material are not specified.
Mounts
PMAX-0517
Pole Mount for 3.25" to 7.0" Poles
The PMAX-0517 secures A46, A48, A421 and A425 cameras to poles measuring 3.25" to 7.0". The aluminum bracket is rated for indoor and outdoor use.
Mounts
PMAX-0518
Pole Mount for 2" to 3" Poles
The PMAX-0518 is the small-pole variant for A46, A48, A421 and A425 cameras, clamping to poles of 2" to 3". It is finished in white and weighs 248.5 g.
Mounts
PMAX-0524
Stainless Steel Pole Mount for 2.64" to 5" Poles
The PMAX-0524 is a stainless steel pole mount for the A46, A410, A421, A422, A423 and A425 cameras and the VMGB-359. It accepts poles from 2.64" to 5".
Mounts
PMAX-0526
Pole Mount for 2.64" to 5" Poles
The PMAX-0526 is a light pole mount for the Y, Z and K series cameras listed, including the -P1 variants. It fits poles of 2.64" to 5" and combines aluminum and stainless steel parts.
Mounts
PMAX-0531
Pole Mount for 5.25" to 8.5" Poles
The PMAX-0531 is a pole mount for the PMAX-0346, supporting large poles of 5.25" to 8.5". It is finished in warm gray.
Mounts
PMAX-0532
Pole Mount for 2.6" to 5" Poles
The PMAX-0532 is a galvanized sheet pole mount for the Z5x, Z8x, Z9x, A7x and Q550 families, plus the Z724 and Z972. It clamps to poles of 2.6" to 5" and weighs 207.5 g.
Mounts
PMAX-0533
Pole Mount for 2.64" to 5" Poles
The PMAX-0533 is an aluminum alloy pole mount for A310, A311 and A314 cameras. It supports poles from 2.64" to 5" and is finished in white.
Mounts
PMAX-0534
Pole Mount with Junction Box for 3.25" to 7.0" Poles
The PMAX-0534 combines a pole mount and a junction box for the Q450 and A426 cameras. It supports poles of 3.25" to 7.0" and is made of aluminum.
Mounts
PMAX-0537
Pole Mount with Junction Box for 2.64" to 5" Poles
The PMAX-0537 is a pole mount with an integrated junction box for the A966, A967, A967B, A967B-2MP and A972. It accepts poles of 2.64" to 5" and uses aluminum and stainless steel construction.
Mounts
PMAX-0538
Pole Mount for 2.64" to 5" Poles
The PMAX-0538 is a broad-compatibility pole mount covering the Z, K, A7x and Q550 families listed. It clamps to poles of 2.64" to 5" and is made of aluminum alloy.
Mounts
PMAX-0540
Camera Mount
The PMAX-0540 is a camera mounting accessory. No compatibility, material or dimension data is available for this item, so please confirm details with TactiSight before ordering.
Mounts
PMAX-0541
Anti-Corrosion Pole Mount for A962
The PMAX-0541 is an outdoor pole mount for the A962, built for corrosive coastal conditions. It uses SUS316L stainless steel with a protective coating, giving a stated seashore chassis resistance of about 3 years.
Mounts
PMAX-0542
Horizontal Pole Mount for 2.64" to 5" Poles
The PMAX-0542 is a horizontal pole mount for the A966, A967, A967B, A967B-2MP and A972 cameras. It supports poles of 2.64" to 5" and is made of stainless steel.
Mounts
PMAX-0543
Stainless Steel Pole Mount for 3" to 5.1" Poles
The PMAX-0543 is an outdoor stainless steel pole mount for the K9001. It clamps to poles of 3" to 5.1" and weighs 3080 g.
Mounts
PMAX-0545
Camera Mount
The PMAX-0545 is a camera mounting accessory. No compatibility, material or dimension data is available for this item, so please confirm details with TactiSight before ordering.
Mounts
PMAX-0546
Camera Mount
The PMAX-0546 is a camera mounting accessory. No compatibility, material or dimension data is available for this item, so please confirm details with TactiSight before ordering.
Mounts
PMAX-0702
Outdoor Junction Box for PTZ and Dome Cameras
The PMAX-0702 is an IP66 aluminum junction box for PTZ and dome cameras installed outdoors. It gives cable connections a protected enclosure close to the camera.
Mounts
PMAX-0704
IP66 Junction Box for A4x, B4x, E4x and I4x Cameras
The PMAX-0704 is an outdoor aluminum junction box with IP66 protection. It supports a wide group of A, B, E and I series cameras and the PMAX-0203 to PMAX-0205 mounts.
Mounts
PMAX-0711
Junction Box for Z950
The PMAX-0711 is an aluminum junction box for the Z950 camera. It weighs 3198.5 g and is finished in white.
Mounts
PMAX-0712
Junction Box for Z9x, Z714, Z77 and K7x
The PMAX-0712 is a compact round junction box for the Z9x, Z714, Z77 and K7x cameras. It is made of aluminum and weighs 183.5 g.
Mounts
PMAX-0714
Junction Box for Z31
The PMAX-0714 is a small square aluminum junction box for the Z31 camera, measuring 93 x 93 x 39 mm. It is finished in white.
Mounts
PMAX-0718
Junction Box for A71, A74 and A77
The PMAX-0718 is a compact round junction box for the A71, A74 and A77 cameras. It is made of aluminum alloy and weighs 172.5 g.
Mounts
PMAX-0721
Junction Box for A422 and A423
The PMAX-0721 is a junction box matched to A422 and A423 cameras. It provides a base for routing and terminating cabling at the mounting point. The body is made of aluminum alloy.
Mounts
PMAX-0723
Junction Box for Z83 and Z84
The PMAX-0723 is a junction box matched to Z83 and Z84 cameras. It provides a base for routing and terminating cabling at the mounting point. The body is made of aluminum alloy.
Mounts
PMAX-0724
Junction Box for Y31, Y32, Z316, Z317, K31, K32 and K33 Series
The PMAX-0724 is a junction box matched to Y31, Y32, Z316, Z316-P1, Z317, Z317-P1, K31, K31-P1, K32, K32-P1 and K33 cameras. It provides a base for routing and terminating cabling at the mounting point. The body is made of aluminum alloy.
Mounts
PMAX-0725
Junction Box for Z41 and Z42
The PMAX-0725 is a junction box matched to Z41 and Z42 cameras. It provides a base for routing and terminating cabling at the mounting point. The body is made of aluminum alloy.
Mounts
PMAX-0726
Junction Box for A310, A311 and A314
The PMAX-0726 is a junction box matched to A310, A311 and A314 cameras. It provides a base for routing and terminating cabling at the mounting point. The body is made of aluminum alloy.
Mounts
PMAX-0727
Junction Box for Y7x, Z5x, Z7x and K5x
The PMAX-0727 is a junction box matched to the Y7x, Z5x, Z7x and K5x families cameras. It provides a base for routing and terminating cabling at the mounting point. The body is made of aluminum alloy.
Mounts
PMAX-0728
Junction Box for Q450 and A426
The PMAX-0728 is a junction box matched to Q450 and A426 cameras. It provides a base for routing and terminating cabling at the mounting point.
Mounts
PMAX-0729
Junction Box for Z39, Z310, Z318, Z319, Z322, Z49, Z412, Z413 and Z419
The PMAX-0729 is a junction box matched to Z39, Z310, Z318, Z319, Z322, Z49, Z412, Z413, Z413-P1 and Z419 cameras. It provides a base for routing and terminating cabling at the mounting point. The body is made of aluminum alloy.
Mounts
PMAX-0731
Junction Box for Z411
The PMAX-0731 is a junction box matched to Z411 cameras. It provides a base for routing and terminating cabling at the mounting point. The body is made of aluminum alloy.
Mounts
PMAX-0733
Junction Box for Z959
The PMAX-0733 is a junction box matched to Z959 cameras. It provides a base for routing and terminating cabling at the mounting point. The body is made of aluminum alloy.
Mounts
PMAX-0735
Junction Box for A573 Series Cameras
The PMAX-0735 is a round junction box designed to sit behind compatible A573-series cameras and tidy the cable connection point. It gives a neat, enclosed termination on the mounting surface.
Mounts
PMAX-0736
Junction Box for Z724, Z81 to Z87, Z812 to Z814, Z914, Z972 and Q550
The PMAX-0736 is a junction box matched to Z724, Z81, Z82, Z85, Z86, Z87, Z812, Z813, Z814, Z914, Z972 and Q550 cameras. It provides a base for routing and terminating cabling at the mounting point. The body is made of aluminum alloy.
Mounts
PMAX-0737
Junction Box for Z411 and Z429
The PMAX-0737 is a junction box matched to Z411 and Z429 cameras. It provides a base for routing and terminating cabling at the mounting point. Material and finish are not specified.
Mounts
PMAX-0738
Anti-Corrosion Junction Box for A962
The PMAX-0738 is an outdoor junction box designed for A962 cameras. Its aluminum alloy body carries a protective coating that resists corrosion near the sea. It supports loads up to 10 kg.
Mounts
PMAX-0739
Camera Mount
The PMAX-0739 is a camera mount accessory from the mounting range. No dimensions, material or compatibility data are available for this item, so confirm fit before ordering.
Mounts
PMAX-0740
Junction Box for A76D, A77D, A78D, A820D, A821D and A822D
The PMAX-0740 is a junction box matched to A76D, A77D, A78D, A820D, A821D and A822D cameras. It provides a base for routing and terminating cabling at the mounting point. The body is made of aluminum alloy.
Mounts
PMAX-0803
Gang Box Converter for Indoor Domes
The PMAX-0803 is a gang box converter for indoor dome cameras. It adapts the camera base to 4-inch square and two-gang boxes, so the camera can be fixed to existing electrical boxes. It is intended for indoor use.
Mounts
PMAX-0804
Gang Box Converter for Outdoor Domes
The PMAX-0804 is a gang box converter for outdoor dome cameras. It adapts the camera base to two-gang boxes, so the camera can be fixed to existing electrical boxes. It is intended for indoor/outdoor use.
Mounts
PMAX-0805
Gang Box Converter for D5x, D9x, E5x, E78, E9x
The PMAX-0805 is a gang box converter for D5x, D9x, E5x, E78, E9x and E9xx/M cameras. It adapts the camera base to 4-inch round and 4-inch octagon boxes, so the camera can be fixed to existing electrical boxes. It is intended for indoor use.
Mounts
PMAX-0806
Gang Box Converter for B4x and E44 to E46
The PMAX-0806 is a gang box converter for B4x, E44, E45, E46, E44A, E45A and E46A cameras. It adapts the camera base to 4-inch round and 4-inch octagon boxes, so the camera can be fixed to existing electrical boxes. It is intended for outdoor use.
Mounts
PMAX-0807
Gang Box Converter for PMAX-0102, 0312, 0313, 0314
The PMAX-0807 is a gang box converter for PMAX-0102, PMAX-0312, PMAX-0313 and PMAX-0314 mounts. It adapts the camera base to two-gang boxes, so the camera can be fixed to existing electrical boxes. It is intended for indoor/outdoor use.
Mounts
PMAX-0808
Converter Ring, 1.5" NPT
The PMAX-0808 adapts a camera to mounting accessories with a 1.5" NPT thread. It lets you use third-party poles, arms and brackets without changing the camera. It is rated for indoor/outdoor installation.
Mounts
PMAX-0810
Mount Kit and Converter Ring, 1.5" NPT
The PMAX-0810 is a mount kit with a 1.5" NPT converter ring for A8x cameras, except A88. It allows these cameras to be attached to third-party poles, arms and brackets. It is rated for indoor and outdoor installation.
Mounts
PMAX-0812
Gang Box Converter for A88, A92, A94, A96
The PMAX-0812 is a gang box converter for A88, A92, A94 and A96 cameras. It adapts the camera base to 4-inch round and 4-inch octagon boxes, so the camera can be fixed to existing electrical boxes.
Mounts
PMAX-0813
Gang Box Converter for A8x
The PMAX-0813 is a gang box converter for A8x cameras (except A88). It adapts the camera base to two-gang boxes, so the camera can be fixed to existing electrical boxes. It is intended for indoor/outdoor use.
Mounts
PMAX-0816
Converter Ring, 1.0" NPT, White
The PMAX-0816 adapts a camera to mounting accessories with a 1.0" NPT thread. It lets you use third-party poles, arms and brackets without changing the camera.
Mounts
PMAX-0820
Gang Box Converter for A71, A74, A77, Z91, Z94, Z95
The PMAX-0820 is a gang box converter for A71, A74, A77, Z91, Z94 and Z95 cameras. It adapts the camera base to 4-inch round and 4-inch octagon boxes, so the camera can be fixed to existing electrical boxes.
Mounts
PMAX-0822
Gang Box Converter for A711 and A713
The PMAX-0822 is a gang box converter for A711 and A713 cameras. It adapts the camera base to an electrical box. Box type, material and dimensions are not specified.
Mounts
PMAX-0901
Magnetic Desktop Base for Micro Box Cameras
The PMAX-0901 is a desktop stand for micro box cameras. A magnetic base holds the camera in place on a desk or shelf. It is intended for indoor use.
Mounts
PMAX-1003
Flush Mount Kit for D6x, D7x, D8x, E61 to E67, E7x (except E78) and E81 to E88
The PMAX-1003 is a flush mount kit for D6x, D7x, D8x, E61 to E67, E7x (except E78) and E81 to E88 cameras. It lets the camera sit recessed in the ceiling surface. It is intended for indoor/outdoor use.
Mounts
PMAX-1006
Flush Mount Kit for D5x and E5x
The PMAX-1006 is a flush mount kit for D5x and E5x cameras. It lets the camera sit recessed in the ceiling surface. It is intended for indoor use.
Mounts
PMAX-1010
Flush Mount Kit for I91, I92 and KCM-8111
The PMAX-1010 is a flush-mount kit for I91, I92 and KCM-8111 cameras. It lets the camera sit recessed in a ceiling or wall surface rather than hanging below it. Use it where a low-profile installation is required.
Mounts
PMAX-1011
Flush Mount Kit for B511
The PMAX-1011 is a flush-mount kit for the B511 camera. It lets the camera sit recessed in a ceiling or wall surface rather than hanging below it. Use it where a low-profile installation is required.
Mounts
PMAX-1012
Flush Mount Kit for B6x
The PMAX-1012 is a flush-mount kit for B6x cameras. It lets the camera sit recessed in a ceiling or wall surface rather than hanging below it. Use it where a low-profile installation is required.
Mounts
PMAX-1013
Flush Mount Kit for B8x and B9x
The PMAX-1013 is a flush-mount kit for B8x and B9x cameras. It lets the camera sit recessed in a ceiling or wall surface rather than hanging below it. Use it where a low-profile installation is required.
Mounts
PMAX-1014
Flush Mount Kit for E610
The PMAX-1014 is a flush-mount kit for the E610 camera. It lets the camera sit recessed in a ceiling or wall surface rather than hanging below it. Use it where a low-profile installation is required.
Mounts
PMAX-1015
Flush Mount Kit for B71, E89, E815-E817 and E822
The PMAX-1015 is a flush-mount kit for B71, E89, E815 to E817 and E822 cameras. It lets the camera sit recessed in a ceiling or wall surface rather than hanging below it. Use it where a low-profile installation is required.
Mounts
PMAX-1017
Tiltable Flush Mount for Pinhole Covert Cameras
The PMAX-1017 is a flush mount for pinhole covert cameras that allows the viewing angle to be adjusted after installation. It is made of aluminium and intended for indoor use. A low-profile body keeps the installation discreet.
Mounts
PMAX-1019
Flush Mount Kit for B9xA and B910
The PMAX-1019 is a flush-mount kit for B9xA and B910 cameras. It lets the camera sit recessed in a ceiling or wall surface rather than hanging below it. Use it where a low-profile installation is required.
Mounts
PMAX-1027
Flush Mount Kit for A61, A62 and A8x (except A88)
The PMAX-1027 is a flush-mount kit for A61, A62 and A8x cameras (A88 excluded). It lets the camera sit recessed in a ceiling or wall surface rather than hanging below it. Use it where a low-profile installation is required.
Mounts
PMAX-1028
Flush Mount Kit for B74A, B76A and B77A
The PMAX-1028 is a flush-mount kit for B74A, B76A and B77A cameras. It lets the camera sit recessed in a ceiling or wall surface rather than hanging below it. Use it where a low-profile installation is required.
Mounts
PMAX-1030
Flush Mount Kit for A811, A813 and A818
The PMAX-1030 is a flush-mount kit for A811, A813 and A818 cameras. It lets the camera sit recessed in a ceiling or wall surface rather than hanging below it. Use it where a low-profile installation is required.
Mounts
PMAX-1031
Flush Mount Kit for Z83 and Z84
The PMAX-1031 is a flush-mount kit for Z83 and Z84 cameras. It lets the camera sit recessed in a ceiling or wall surface rather than hanging below it. Use it where a low-profile installation is required.
Mounts
PMAX-1032
Flush Mount Kit for A71, A74, A77, E78, E79 and E710
The PMAX-1032 is a flush-mount kit for A71, A74, A77, E78, E79 and E710 cameras. It lets the camera sit recessed in a ceiling or wall surface rather than hanging below it. Use it where a low-profile installation is required.
Mounts
PMAX-1033
Flush Mount Kit for A711 and A713
The PMAX-1033 is a flush-mount kit for A711 and A713 cameras. It lets the camera sit recessed in a ceiling or wall surface rather than hanging below it. Use it where a low-profile installation is required.
Mounts
PMAX-1034
Flush Mount Kit for Q83
The PMAX-1034 is a flush-mount kit for the Q83 multi-imager dome camera. It lets the camera sit recessed in a ceiling or wall surface rather than hanging below it. Use it where a low-profile installation is required.
Mounts
PMAX-1035
Flush Mount Kit for A826
The PMAX-1035 is a flush-mount kit for the A826 camera. It lets the camera sit recessed in a ceiling or wall surface rather than hanging below it. Use it where a low-profile installation is required.
Mounts
PMAX-1036
Flush Mount Kit for Z959
The PMAX-1036 is a flush-mount kit for the Z959 speed dome camera. It lets the camera sit recessed in a ceiling or wall surface rather than hanging below it. Use it where a low-profile installation is required.
Mounts
PMAX-1105
Bracket for B2x Indoor Box Cameras
The PMAX-1105 is a bracket for mounting B2x box cameras indoors. It is a lightweight plastic part in Warm Gray, suited to ceiling or wall installations in offices and retail spaces.
Mounts
PMAX-1106
Aluminium Bracket for Outdoor-Housing Box Cameras
The PMAX-1106 is an aluminium bracket for box cameras fitted in outdoor housings. It is specified for KCM-5211E, KCM-5511 and KCM-5611, and for other box cameras installed in an outdoor housing.
Mounts
PMAX-1107
Aluminium Bracket for D3x, D4x, E3x, E41-E43 and E47 Bullet Cameras
The PMAX-1107 is an aluminium mounting bracket for bullet cameras. It is intended only for the D3x, D4x, E3x, E41 to E43 and E47 models.
Mounts
PMAX-1108
Bracket for Covert Cameras
The PMAX-1108 is a small aluminium bracket that fits covert cameras. L-shape pinhole cameras are the one exception. It is finished in black for unobtrusive indoor installations.
Mounts
PMAX-1110
Gooseneck Bracket for Micro Box Cameras
The PMAX-1110 is a gooseneck bracket for micro box cameras. The flexible arm allows the camera to be pointed freely once the bracket is in place. It is intended for indoor use.
Mounts
PMAX-1111
Edge Clamp for Micro Box Cameras
The PMAX-1111 is a clamp-style mount for micro box cameras. It grips an edge or pole without drilling, with a maximum supported pole diameter of 1.26 in. It is made of plastic and aluminium for indoor use.
Mounts
PMAX-1118
Stainless Steel 316 Bracket for PMAX-0233 to PMAX-0236
The PMAX-1118 is a bracket made from 316 stainless steel, matched to the PMAX-0233, PMAX-0234, PMAX-0235 and PMAX-0236 units. At 1611 g it is a heavy-duty mounting part for demanding environments.
Mounts
PMAX-1119
Camera Mount
The PMAX-1119 is a camera mount in the mounting accessories range. It is cross-referenced with the PMAX-0239 to PMAX-0242 positioning housings. Further specifications will be added when available.
Mounts
PMAX-1121
Aluminium Alloy Bracket for Q170
The PMAX-1121 is a compact bracket made for the Q170 camera. It is built from aluminium alloy with a black finish and weighs about 125 g.
Mounts
PMAX-1123
Camera Mount
The PMAX-1123 is a camera mount in the mounting accessories range. It is cross-referenced with the A432 and A432-P1 bullet cameras. Further specifications will be added when available.
Mounts
PMAX-1200
19-inch Rackmount Rails for Standalone NVRs
The PMAX-1200 is a pair of rackmount rails for placing standalone NVRs in a standard 19-inch rack. The rails extend to suit different rack depths, which helps in server rooms and control rooms with mixed equipment. They are intended for the NVR models listed below.
Mounts
PMAX-1202
19-inch Rackmount Rails for CMS-200, ENR-190, ENR-420, ENR-421 and LPR-120
The PMAX-1202 is a pair of 19-inch rackmount rails for installing standalone recorders in an equipment rack. The rails extend to 26.4 in to suit different rack depths. It fits the CMS-200, ENR-190, ENR-420, ENR-421 and LPR-120.
Mounts
PMAX-1203
26-inch Rackmount Rails for CMS-200, ENR-190, ENR-420, ENR-421 and LPR-120
The PMAX-1203 is a longer rail set for mounting standalone recorders in deeper racks. The 25.6 in rails extend to 33.4 in. It fits the CMS-200, ENR-190, ENR-420, ENR-421 and LPR-120.
Mounts
PMAX-1204
Rack Bracket for ZNR-220P and ZNR-221P
The PMAX-1204 is a rack bracket for installing ZNR-220P and ZNR-221P recorders in an equipment rack. It is a light part at 87 g.
Mounts
PMAX-1205
Rack Bracket for ZNR-421 and ZNR-423
The PMAX-1205 is a rack bracket for standalone NVRs. It is intended for the ZNR-421 and ZNR-423 recorders and lets them be installed in a standard equipment rack.
Mounts
PMAX-1208
20-inch Rackmount Rails for CMS-201, PCR-204 and ACS-402
The PMAX-1208 is a 20-inch rackmount rail kit for standalone server and recorder units. It is specified for the CMS-201, PCR-204 and ACS-402 and supports rack-based deployments.
Mounts
PMAX-1211
Standalone NVR Mount
The PMAX-1211 is a mounting accessory in the standalone NVR mount category. The available data does not list compatible models, material or dimensions, so confirm fit before ordering.
Mounts
PMAX-1300
Aluminum Ceiling Bracket for B4x Cameras
The PMAX-1300 is a ceiling bracket for the B4x camera family. It is made of aluminum with a warm gray finish and is rated for outdoor application environments.
Mounts
PMAX-1400
Aluminum Mount Kit for D5x, D9x, E5x, E78, E9x and E9xx/M
The PMAX-1400 is a mount kit covering the D5x, D9x, E5x, E78, E9x and E9xx/M camera series. It is an aluminum part in warm gray that can be used indoors or outdoors.
Mounts
PMAX-1402
White Aluminum Mount Kit for Z91, Z97, Z98, Z710, Z714, Z715, A71, A76, A77
The PMAX-1402 is a mount kit for the Z91, Z97, Z98, Z710, Z714, Z715, A71, A76 and A77 cameras. It is built from aluminum with a white finish.
Mounts
PMAX-1403
White Ceiling Mount for Z95x and K95x Cameras
The PMAX-1403 is a ceiling mount designed for the Z95x and K95x camera series. It has a white finish and a low-profile round body.
Mounts
PMAX-1404
White Mount Kit for Q83 Cameras
The PMAX-1404 is a mount kit for the Q83 camera, supplied in white. Dimensions, weight and material are not given in the available data.
Mounts
PMAX-1405
White Mount Kit for A826 Cameras
The PMAX-1405 is a mount kit for the A826 camera, supplied in white. Dimensions, weight and material are not given in the available data.
Mounts
PMAX-1406
Mount Kit for Z959 Cameras
The PMAX-1406 is a camera mount kit for the Z959. No finish, material or dimensions are listed, so check the physical specification before planning an installation.
Mounts
PMAX-1407
Mount Kit for Q84 Cameras
The PMAX-1407 is a camera mount kit for the Q84. The data lists no finish, material, weight or dimensions.
Mounts
PMAX-1501
PF 3/4" Nylon Cable Gland for Outdoor Domes
The PMAX-1501 is a cable gland that seals the cable entry on outdoor dome cameras. It suits cables of 4.3 to 6.4 mm and is not intended for hemispheric domes.
Mounts
R706-00006
Integrated Bracket for B41x, B43, I42, I48, E413, E415 and E417 Bullet Cameras
The R706-00006 is an integrated mounting bracket for bullet cameras. It fits the B41x, B43, I42, I48, E413, E415 and E417 and is made of aluminum.
Mounts
R707-40001
Surface Mount for Indoor PTZ Cameras
The R707-40001 is a surface mount for indoor PTZ cameras. It is white and combines plastic and aluminum parts.
Mounts
R707-A0002
Bundled Flush Mount for Fisheye Covert Cameras
The R707-A0002 is a flush mount bundled with a fisheye covert camera. It weighs only 12.5 g.
Mounts
R707-A0004
Bundled Surface Mount for L-Shape Pinhole Covert Cameras
The R707-A0004 is a surface mount bundled with L-shape pinhole covert cameras. It is a white plastic part weighing 70 g.
Mounts
R707-A0005
Bundled Tilted Mount for L-Shape Pinhole Covert Cameras
The R707-A0005 is a tilted mount bundled with L-shape pinhole covert cameras. It is a white plastic part weighing 20.5 g.
Mounts
R707-A0007
Bundled Mounting Rail Kit for Covert Cameras
The R707-A0007 is a mounting rail kit bundled with covert cameras. It is made of silver aluminum and weighs 21.5 g.
Mounts
R708-10000
Bundled Bracket for Q22 Cameras
The R708-10000 is a bracket bundled with the Q22 camera. It weighs 115.56 g; material and finish are not listed.
Power & PoE
PPBX-0016
12V 5A Power Adapter for R7 Series
The PPBX-0016 is a mains power adapter that delivers 12 V DC at up to 60 W. It is supplied with universal connectors and is intended for the R7 series.
Power & PoE
PPBX-0020
AC 24V 2A Power Adapter for PLED-0207, 0208, 0209
The PPBX-0020 supplies 24 V AC at 2 A. It is the matched power source for the PLED-0207, PLED-0208 and PLED-0209 IR illuminators.
Power & PoE
PPBX-0023
12V 2A Power Adapter with DC Plug (US)
The PPBX-0023 is a compact 12 V, 2 A adapter with a US plug and DC connector. It powers cameras such as the A317, A422, A423, K371, K372, Z415, Z416 and Z972, including their listed variants.
Power & PoE
PPBX-0026
12V Power Adapter AC 100-240V (US)
The PPBX-0026 is a small wall adapter with a US plug and a 12 V DC output. It is listed for several camera families and carries FCC, UL and Level VI efficiency approvals.
Power & PoE
PPBX-0033
48V 3.75A Power Adapter for I98 and I915
The PPBX-0033 converts mains power to 48 V DC for the I98 and I915. Its output rating falls with temperature, from 180 W at 25°C to 90 W at 60°C.
Power & PoE
PPBX-0036
12 V / 2 A Power Adapter for ECD-1100
The PPBX-0036 is a replacement or spare power supply for the ECD-1100. It accepts mains from 100 to 240 V AC and outputs a regulated 12 V DC at 2 A. It ships with a US-type connector and is made in Taiwan.
Power & PoE
PPOE-0201
90 W Single-Port Gigabit PoE Injector (802.3bt)
The PPOE-0201 adds PoE to a single Ethernet run, supplying up to 90 W under IEEE 802.3bt Type 4. It is intended for power-hungry cameras that exceed standard PoE budgets, such as the Z953, Z954, Q83 and Q84. The unit works from universal AC mains and is for indoor use.
Power & PoE
PPOE-0202
90W Multi-Gigabit High PoE Injector
The PPOE-0202 adds PoE to one Ethernet link at up to 90 W. It is listed for the A952, A956, Z953, Z954, Q83 and Q84, and supports 10/100/1000M and multi-gigabit links.
Power & PoE
PPOE-0302
60W 4-Pair Gigabit High PoE Injector
The PPOE-0302 supplies up to 60 W to one PoE device over a gigabit link. It is specified for the A967 and A967B cameras.
Lenses
PLEN-0101
f4.2mm F1.8 Fixed Lens, CS Mount
The PLEN-0101 is a fixed focal length lens for cameras with a CS mount. Its F1.8 aperture suits low-light scenes, and focus is set manually during installation.
Lenses
PLEN-0114
f4.2mm F1.8 Fixed Lens, Board Mount
The PLEN-0114 is a compact fixed lens for cameras that use a board-mount interface. It has a fixed focus, so no focus adjustment is needed after installation.
Lenses
PLEN-0130
f2.93mm Fixed Lens, CS Mount
The PLEN-0130 is a fixed-focal CS-mount lens with a wide field of view for general-purpose indoor and outdoor cameras. It is a manual-focus, fixed-iris design suited to 1/2.7" sensors. Its low weight keeps it easy to fit into compact camera bodies.
Lenses
PLEN-0131
f2.8-12mm F1.4 Vari-focal Lens, CS Mount
The PLEN-0131 is a vari-focal lens that lets the installer set the field of view on site. A wide F1.4 aperture supports low-light imaging on CS-mount cameras.
Lenses
PLEN-2103
f4.0mm F2.0 Fixed Lens, CS Mount
The PLEN-2103 is a fixed 4.0 mm lens for CS-mount cameras with larger sensors. A fixed iris keeps the optical setup simple for general surveillance use.
Lenses
PLEN-2200
Vari-focal 3.1-13.3mm DC-Iris Lens, CS Mount
The PLEN-2200 is a CS-mount vari-focal lens that lets installers set the field of view on site, from wide to narrow. A DC iris adjusts exposure automatically in changing light. It supports sensors up to 1/2.3" and uses manual focus.
Lenses
PLEN-2205
f2.8-12mm F1.4 IR-Corrected P-Iris Vari-focal Lens
The PLEN-2205 is a vari-focal lens with IR correction for day and night use. P-Iris control lets a compatible camera manage the aperture precisely.
Lenses
PLEN-2206
f2.8-8.5mm F1.2 P-Iris Vari-focal Lens
The PLEN-2206 is a light, bright vari-focal lens for CS-mount cameras. Its F1.2 aperture and P-Iris control support consistent image quality as lighting changes.
Lenses
PLEN-2213
f5.0-50mm F1.4 DC-Iris Vari-focal Lens
The PLEN-2213 is a long-range vari-focal lens for CS-mount cameras that monitor distant areas. A DC iris adjusts the aperture automatically as light changes.
Lenses
PLEN-4101
f1.9mm F2.8 Fixed Board Mount Lens
The PLEN-4101 is a very small wide-angle lens for compact board-mount cameras. It is fixed focus and fixed iris, and weighs only 5 g.
Lenses
PLEN-4102
2.55 mm Fixed Board Lens
The PLEN-4102 is a small board-mount lens with a fixed 2.55 mm focal length. Its fixed iris and fixed focus keep setup simple for compact camera heads. It supports day/night operation and is made for 1/2.3-inch sensors.
Lenses
PLEN-4105
f2.1mm F1.8 Fixed Board Mount Lens
The PLEN-4105 is a wide-angle fixed lens for board-mount cameras. Its F1.8 aperture and day/night capability suit compact indoor and low-light installations.
Lenses
PLEN-4503
Pinhole f2.8mm Fixed Lens, Mini Mount
The PLEN-4503 is a pinhole lens for discreet installations where only a very small lens opening should be visible. It connects through a 2 m cable and is fixed focus with a fixed iris.
Lenses
PLEN-4504
Pinhole f3.7mm Fixed Lens, Mini Mount
The PLEN-4504 is a pinhole lens for discreet installations where only a very small lens opening should be visible. It connects through a 2 m cable and is fixed focus with a fixed iris.
Lenses
PLEN-4505
Pinhole f3.7mm Fixed Lens, Mini Mount
The PLEN-4505 is a pinhole lens for discreet installations where only a very small lens opening should be visible. It connects through a 2 m cable and is fixed focus with a fixed iris.
Lenses
PLEN-4506
Pinhole f2.8mm Fixed Lens, Board Mount (M12)
The PLEN-4506 is a pinhole lens for discreet installations where only a very small lens opening should be visible. It connects through a 2 m cable and is fixed focus with a fixed iris.
Lenses
PLEN-4507
Pinhole f4.0mm Fixed Lens, Board Mount (M12)
The PLEN-4507 is a pinhole lens for discreet installations where only a very small lens opening should be visible. It connects through a 2 m cable and is fixed focus with a fixed iris.
Housings
PMAX-0200
Outdoor Box Camera Housing with Heater and Fan, 110V
The PMAX-0200 is an outdoor housing for box cameras with a built-in heater and fan for temperature control. The aluminum body is rated IP66 and the housing operates from -30°C to 50°C on 110V.
Housings
PMAX-0202
Outdoor Box Camera Housing
The PMAX-0202 is a compact outdoor housing for box cameras. It has an aluminum body with CE and IP66 approvals and no heater or fan listed.
Housings
PMAX-0203
Heavy Duty Outdoor Housing with Heater, Fan and Bracket, 230V
The PMAX-0203 is a heavy-duty outdoor housing for box cameras, supplied with a mounting bracket. A heater and fan regulate the interior, and the metal casing is rated IP68 and IK10.
Housings
PMAX-0204
Heavy-Duty Outdoor Box Camera Housing with Heater and Fan, 110V
The PMAX-0204 is a weather-sealed housing for box cameras installed outdoors. A built-in heater and fan help keep the camera within its working temperature across wide climate swings. The kit includes a mounting bracket and runs from 110V AC.
Housings
PMAX-0206
PoE Heavy Duty Outdoor Housing with Heater, Fan, Defogger and Bracket
The PMAX-0206 is a heavy-duty outdoor housing for box cameras that is powered over High PoE. It adds a defogger to the heater and fan, includes a bracket, and has an IP68, IK10 metal casing.
Housings
PMAX-0208
PoE Explosion Proof Box Camera Housing with Heater, Fan and Bracket
The PMAX-0208 is an explosion proof housing for box cameras in hazardous areas. It is built of 316 stainless steel, rated IP68, and is powered over High PoE with a maximum draw of 25.5 W.
Housings
PMAX-0210
PoE Stainless Steel Housing with Heater, Fan and Bracket
The PMAX-0210 is a cylindrical outdoor housing in 316 stainless steel for box cameras. It is rated IP68 and NEMA 4X, uses a heater and fan, and is powered over High PoE.
Housings
PMAX-0221
PoE Explosion-proof SUS316 Positioning Housing with Heater, Fan and IR
The PMAX-0221 is an explosion-proof pan-tilt housing in 316 stainless steel for cameras in hazardous locations. It adds 18 IR LEDs with 100 m working distance, plus a heater and fan.
Housings
PMAX-0222
PoE Explosion-proof SUS316 Positioning Housing with Fan and Heater
The PMAX-0222 is an explosion-proof pan-tilt positioning housing made of 316 stainless steel. A heater and fan manage the internal temperature, and it has no IR illumination.
Housings
PMAX-0228
PoE Explosion Proof Housing with Heater, Fan, IR and Bracket
The PMAX-0228 is an explosion proof housing in 316 stainless steel with an integrated pan-tilt mechanism. It has 18 IR LEDs reaching 100 m, along with a heater, fan and mounting bracket.
Housings
PMAX-0233
PoE Explosion Proof Housing with Heater, IR and Fan for E2X, B2X, A2X
The PMAX-0233 is a PoE explosion proof housing for E2X, B2X and A2X cameras. It combines 850 nm IR illumination reaching 100 m with a heater and fan, and operates from -40°C to 60°C.
Housings
PMAX-0234
PoE Stainless Steel Housing with Heater, IR and Fan for E2X, B2X, A2X
The PMAX-0234 is a PoE-powered stainless steel housing for E2X, B2X and A2X cameras. It provides IR illumination to 100 m together with a heater and fan, in an IP68-rated body.
Housings
PMAX-0235
PoE Explosion-Proof Box Camera Housing with Heater and Fan
The PMAX-0235 is an explosion-proof housing for box cameras installed in hazardous areas. It is built from stainless steel and includes a heater and a fan for temperature control, with PoE power input. It is intended for the E2X, B2X and A2X camera series.
Housings
PMAX-0236
PoE Stainless Steel Housing with Heater and Fan
The PMAX-0236 protects box cameras in harsh outdoor conditions, with a heater and fan to manage temperature. A single PoE (IEEE 802.3at) connection powers both the housing and the camera. It is made for the E2X, B2X and A2X camera families.
Housings
PMAX-0237
PoE PTZ Explosion-Proof Housing with Ceiling Bracket
The PMAX-0237 houses PTZ cameras that must operate in explosion-risk areas. It comes with a ceiling-mount bracket and is made of stainless steel. It is designed for the B913, B923 and B934 cameras.
Housings
PMAX-0238
PoE PTZ Stainless Steel Housing with Wall Bracket
The PMAX-0238 is a weatherproof stainless steel housing for outdoor PTZ cameras, delivered with a wall-mount bracket. It protects B913, B923 and B934 units in harsh environments and is intended for PoE-powered installations.
Housings
PMAX-0239
Explosion-Proof Positioning Housing with Fan, Heater and Wiper
The PMAX-0239 is a positioning housing for cameras that operate in explosion-risk areas. A fan, heater and wiper help keep the camera usable across changing weather. It is designed for the E2X, B2X and A2X series.
Housings
PMAX-0240
Stainless Steel PTZ and Positioning Housing
The PMAX-0240 is a stainless steel positioning housing for demanding installations. It runs from a universal AC supply, and its power figure is quoted with the heater on.
Housings
PMAX-0241
ATEX Positioning Housing with IR LED, Wiper, Fan and Heater
The PMAX-0241 is a stainless steel positioning housing with infrared illumination, pan and tilt movement, wiper, fan and heater. It carries ATEX approvals for explosive atmospheres and mounts on a wall.
Housings
PMAX-0242
Stainless Steel PTZ and Positioning Housing with Wiper
The PMAX-0242 is a heavy-duty positioning housing that gives a camera 360° pan and a -90° to 90° tilt range. Stainless steel 316 construction, a wiper, a heater and a fan suit harsh outdoor and coastal conditions. It is controlled over RS-485 and powered from the AC mains.
Dome Covers
PDCX-0104
Smoked Dome Cover for D51, D52, E51
The PDCX-0104 is a replacement smoked dome cover for indoor dome cameras. The tinted cover hides the camera direction, and the unit weighs 50 g.
Dome Covers
PDCX-1105
Smoked Dome Cover for Indoor Dome Cameras
The PDCX-1105 is a replacement smoked dome cover for indoor dome cameras. The tinted shell conceals which way the lens is pointing while protecting the camera from impact. It suits retail, offices and public interiors.
Dome Covers
PDCX-1106
Vandal-Resistant Smoked Dome Cover for Indoor Mini Domes
The PDCX-1106 is a small tinted cover for indoor mini dome cameras. It adds impact protection rated IK08 and conceals the lens direction.
Dome Covers
PDCX-1109
Vandal-Proof Smoked Dome Cover for B6x, B8x, B9x
The PDCX-1109 is a tinted outdoor replacement cover for the B6x, B8x and B9x dome series. It is rated IK10 for impact resistance.
Dome Covers
PDCX-1110
Vandal-Proof Smoked Dome Cover for B7x, I7x
The PDCX-1110 is a compact tinted dome cover for outdoor B7x and I7x cameras. It provides IK10 impact protection at a weight of 20 g.
Dome Covers
PDCX-1112
Vandal-Proof Smoked Dome Cover for E924(M)-E929(M), E933(M)
The PDCX-1112 is a tinted outdoor cover for the E924(M) to E929(M) and E933(M) cameras. It is rated IK10 for impact resistance.
Dome Covers
PDCX-1113
Vandal-Proof Smoked Dome Cover for E78
The PDCX-1113 is a tinted replacement cover for the E78 camera. It is rated IK10 for impact resistance and weighs 40 g.
Dome Covers
PDCX-1114
Dome Cover Shroud for B6x, B8x, Q61, Q81
The PDCX-1114 is a black shroud made for the dome cover of selected camera models. It weighs 350 g.
Dome Covers
R701-50003
Dome Cover Housing with Transparent Dome for E924-E929(M), E933(M)
The R701-50003 is a replacement dome housing supplied with a transparent dome cover. It suits the E924 to E929(M) and E933(M) cameras and weighs 209 g.
Dome Covers
R701-50004
Transparent Dome Cover for E918-E923(M), E936(M), Q91
The R701-50004 is a clear replacement dome cover. It fits several E-series cameras and the Q91, and weighs 5 g.
Dome Covers
R701-50005
Transparent Dome Cover for E924-E929(M), E933(M)
The R701-50005 is a clear replacement dome cover for the E924 to E929(M) and E933(M) cameras. It weighs 16 g.
Dome Covers
R701-60003
Transparent Dome Cover
The R701-60003 is a clear dome cover supplied as a spare or replacement part. It fits the D53, D54, D55 and E52 to E59 camera series. Use it to restore a scratched or damaged dome without replacing the camera.
Dome Covers
R701-70007
Replacement Transparent Dome Cover
The R701-70007 is a transparent dome cover supplied on its own, for replacing a scratched or damaged cover. It fits a defined list of B and E-series dome models. Only the cover is included.
Dome Covers
R701-70009
Transparent Dome Cover for A8x-10A
The R701-70009 is a clear dome cover sold on its own, without housing or electronics. It is intended for A8x-10A cameras that need a new dome after damage or wear.
Dome Covers
R701-70010
Transparent Dome Cover for A811 and A818
The R701-70010 is a spare dome cover for the A811 and A818 cameras. It is supplied as the cover alone, so it suits maintenance and repair work on installed units.
Dome Covers
R701-90002
Dome Cover Housing with IR Board for B74A, B76A, B77A
The R701-90002 is a replacement housing assembly for the B74A, B76A and B77A cameras. It combines the housing, a transparent dome cover and an IR board in one part.
Bullet Covers
R700-00004
Front Cover for E3x Bullet Cameras
The R700-00004 is a front cover for E3x bullet cameras. It serves as a spare part when the original cover is damaged or worn.
Bullet Covers
R700-00005
Front Cover for D4x and E4x Bullet Cameras
The R700-00005 is a spare front cover for the D4x and E4x bullet camera families. The E48 is not covered by this part.
Bullet Covers
R700-00007
Front Cover for Bullet Camera Series
The R700-00007 is a replacement front cover for the bullet camera models listed below. It is useful when a cover is damaged or needs to be replaced during maintenance. Detailed physical specifications are not published.
Bullet Covers
R700-00008
Front Cover for B415, B416, I42 and I48
The R700-00008 is a front cover intended for the B415, B416, I42 and I48 cameras. It is a maintenance part for units whose original cover needs replacing.
Bullet Covers
R706-00004
Back Cover with Network Cable for D4xA, E4xB, E47
The R706-00004 is a rear cover that already carries a network cable. It is a replacement part for the D4xA, E4xB and E47 cameras.
Bullet Covers
R706-00005
Back Cover with Network Cable for E3x
The R706-00005 is a rear cover supplied with a network cable already fitted. It replaces the back cover on E3x cameras, with the E38 excluded.
Illuminators
PLED-0200
10° IR Illuminator, 120 m Range
The PLED-0200 is an infrared light source for night-time coverage at long range. It has a narrow 10° beam at 850 nm and a weatherproof, vandal-resistant casing.
Illuminators
PLED-0201
25° IR Illuminator, 50 m Range
The PLED-0201 adds infrared light to a camera scene where built-in IR is not enough. A narrow 25-degree beam at 850 nm reaches roughly 50 m, and the housing is rated IP66 and IK10. It suits perimeters and long approaches at night.
Illuminators
PLED-0208
IR Illuminator, 30° Beam, 200 m Range
The PLED-0208 is an external infrared light for extending night-time coverage of long-range cameras. Its narrow 30° beam concentrates light on distant targets such as fences and roads. The aluminum housing is rated for outdoor use.
Audio
PMIC-0100
Active Omnidirectional Microphone
The PMIC-0100 is an active condenser microphone with an omnidirectional pickup. It needs 9-12 V DC and connects to cameras that have a line-in audio input.
Audio
PMIC-0200
Passive Omnidirectional Microphone with 3.5 mm Jack
The PMIC-0200 is a small omnidirectional condenser microphone that adds ambient audio to cameras with a 3.5 mm mic-in input. It draws power from the camera, so no separate supply is needed. It comes with a surface mount and a 2 m cable.
Audio
PMIC-0201
Passive Omnidirectional Microphone
The PMIC-0201 is a passive condenser microphone with an omnidirectional pattern. It connects to mic-in inputs through its 2 m cable or a terminal block and needs no extra DC power.
Audio
PSPK-0007
30 W Outdoor Speaker
The PSPK-0007 is a one-way outdoor speaker rated at 30 W for voice announcements. It connects through an RCA jack and ships with a mounting bracket. IP66 protection and a sturdy housing make it suitable for outdoor poles and walls.
Displays
PDIS-0002
Indoor LED Dot Matrix Display, 128 x 32
The PDIS-0002 is an indoor dot matrix display for status and message output. It has 128 x 32 LEDs on a 5 mm pitch, an aluminium extrusion housing and a 10/100 Ethernet port, and accepts commands over Modbus TCP/IP.
Displays
PDIS-0003
Outdoor LED Dot Matrix Display with Ethernet
The PDIS-0003 is an outdoor LED text display for status and instruction messages at gates, car parks and facilities. It connects over Ethernet and is controlled through Modbus TCP/IP, so it can be driven by automation or integration software. A weather-resistant aluminum housing allows outdoor installation.
Controllers
PJSK-0100
USB PTZ Joystick Controller
The PJSK-0100 is a desktop USB joystick for operating PTZ cameras in compatible management software. A Hall-effect three-axis stick gives smooth pan, tilt and zoom control, and 12 buttons handle presets and shortcuts. It is intended for control-room operators using ENR, INR and MNR series systems.
Controllers
PJSK-0102
PTZ Control Joystick with 4-Inch LCD
The PJSK-0102 is a desktop controller for PTZ cameras on the ZNR, YVR and KNR series. It combines a four-dimensional joystick, 36 keys and a monochrome display, and connects by Ethernet or serial.
Cables
PIOC-0200
USB to RS-232 Serial Converter Cable
The PIOC-0200 is an adapter cable that adds an RS-232 serial port to a computer through USB. It lets technicians configure and control serial devices such as PTZ gear and controllers. Its small size makes it convenient as a field service tool.
Cables
PIOC-0400
M12 to RJ-45 Network Cable, 1 m
The PIOC-0400 is a short network patch cable with an M12 connector on one end and RJ-45 on the other. It joins M12-equipped devices to standard Ethernet equipment.
Extenders
PPEX-0102
PoE Extender
The PPEX-0102 is a PoE extender used to lengthen a powered Ethernet link. It is intended for camera positions that sit farther from the switch than a normal run allows. Technical specifications are not published for this product.
No products match these filters.